Pc Connection; Connecting An Hdmi Or A Dvi Device To The Hdmi Input - JVC LT-32A4 Instructions Manual

PC connection

Follow these steps: On your PC monitor choose a resolution of 1920 × 1080 (LT-32A4: 1360 × 768) at 60Hz
and save this configuration. Shut down your PC and connect the shut off LCD TV.
Use a screensaver to avoid burning-in of static picture content.
Select PC input
Switch on the LCD-TV.
Select the PC mode (see page 9).
Supported PC resolutions
resolution
640x480
800x600
1024x768
1280x720
1280x768
1360x768
1280x1024
1440x900
1920x1080

Connecting an HDMI or a DVI device to the HDMI input

The HDMI input receives digital audio and uncompressed video from a HDMI equipped device or
uncompressed digital video from a DVI equipped device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it only transfers the video signal, so it
is necessary to use separate analogue leads to transfer the audio signals.
Select the HDMI input mode (see P.9).
Audio cable (not supplied)
To DVI output
DVI device
HDMI device
To HDMI output
Use a PC-VGA cable (not supplied) to connect the LCD-Monitor
to your PC. Make the connections carefully so as not to break or
bend the contacts inside the plug.
TV (Rear view)
fps (Hz)
60
60
60
60
60
Note:
60
•
60
60
•
60
HDMI - to - DVI adapter cable
(HDMI type A connector)
(not supplied)
or
HDMI cable
(type A connector)
(not supplied)
To AUDIO PC/
DVI input
To PC input
If no signal or a signal with a non-supported resolution is connected,
NO SIGNAL is displayed.
As this LCD-TV is not a PC monitor correct display cannot be
guaranteed for every PC / graphics card.
To AUDIO PC/DVI input
Audio cable (not supplied)
VGA Cable (not supplied)
TV (Rear view)
TV (Rear view)
PC
17