Connecting Using An Optical Cable - Samsung HW-N400 User Manual

2. "tV arC" appears in the display window of the Soundbar main unit and the Soundbar plays TV
sound.
• If TV sound is inaudible, press the
of the Soundbar to switch to "D.IN" mode. The screen displays "D.IN" and "tV arC" in sequence,
and TV sound is played.
• If "tV arC" does not appear in the display window of the Soundbar main unit, confirm that the
cable is connected to the correct port.
• Use the volume buttons on the TV's remote control to change the volume on the Soundbar.

Connecting using an optical Cable

1. Connect the DIGItaL aUDIo IN (oPtICaL) jack on the Soundbar to the OPTICAL OUT jack of the TV
with a digital optical cable (not supplied).
2. Press the (Source) button on the right side panel or remote control, and then select the "D.IN"
mode.
auto Power Link
Auto Power Link automatically turns on the Soundbar when the TV is turned on.
1. Connect the Soundbar and a TV with a digital optical cable (not supplied).
2. Press the (Source) button on the right side panel or on the remote control, and then select
"D.IN".
(Source) button on the remote control or on the right side

optical Cable
OPTICAL OUT
(not supplied)
ENG - 6
Bottom of the Soundbar
D.IN
right Side of the Soundbar
HDMI IN
DIGITAL AUDIO IN
(OPTICAL)