Table of Contents
Advertisement
Solve problems
"No service," "Network failure," or "Not
done" displays
•
The network connection has been lost. You may be
in a weak signal area. Move and try again.
•
You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
You have entered a number but it was not
dialled
•
Be sure that you have pressed [
•
Be sure that you have accessed the right cellular
network.
•
Be sure that you have not restricted outgoing calls.
Your correspondent cannot reach you
•
Be sure that your phone is switched on. ([
pressed for more than one second.)
•
Be sure that you are accessing the correct cellular
network.
•
Be sure that you have not restricted incoming
calls.
Your correspondent cannot hear you speaking
56
•
•
The phone starts beeping and "Battery low"
flashes on the display
•
].
The audio quality of the call is poor
•
•
]
No number is dialled when you re-call a
Contacts entry
•
•
Be sure that you have switched on the
microphone.
Be sure that you are holding the phone close
enough to your mouth. The microphone is located
at the bottom of the phone.
Your battery is insufficiently charged. Recharge the
battery.
Check the signal strength indicator on the display
(
). The number of bars indicates the signal
strength from strong to weak.
Try moving the phone slightly or moving closer to a
window if you are in a building.
Use the Find menu to ensure the number has been
stored correctly.
Re-store the number, if necessary.
Advertisement
Table of Contents
