Connection To A Pc - Hercules XPS 2.1 Lounge User Manual

- Remote control:
- iPod / Zune adapter (19):
Remove the adapter from the remote control.
-
Thread the iPod or Zune connector through the adapter opening via the underside of the
-
remote control.
Attach the iPod or Zune connector to the adapter as shown in the diagrams below (the logos
-
on the connectors should not be visible). For the iPod nano, also attach the Auxiliary Audio
input connector to the proper location.
Position the adapter back in place in the remote control and thread the USB cable and audio
-
cable into the dedicated grooves on the underside of the remote control.
Adjust your IPod or Zune in place using the lever of the adjustable support (18).
-
A: iPod connector +
B: iPod connector +
C: Zune adapter + Zune connector.

2.2.1. Connection to a PC

- Connect your speaker kit's
plug on your sound card or on the sound card integrated into the motherboard.
audio connector for iPod Nano 1.
audio connector for iPod Nano 2.
jack connector to the green FRONT SPEAKERS
11: Master volume with Standby position
12: Bass frequency control
13: Power LED
14: A udio source selection button
15: Mic rophone plug
16: Headphone plug
automatically disabled when headphones are
connected)
17: Slot for iPod/Zune adapter
18: Adjustable support for MP3 players
XPS 2.1 Lounge
(speakers are
or FRONT OUT
User Manual – 5/8