Get Started; Attach Speakers To The Main Unit; Attach The Stand - Philips HSB3280 User Manual

3 Get started

Caution
•
Use the controls only as stated in this user manual.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of your soundbar. The
model number and serial number are on the
bottom of your soundbar. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________
Attach speakers to the main
unit
1
Place the main unit on a soft and fl at
surface.
• Ensure that the bottom side faces
upwards.
2
Attach the left speaker to the left side of
the main unit.
3
Insert a supplied stud into the hole.
4
Repeat steps 2 and 3 to attach the right
speaker.

Attach the stand

1
Slide the supplied table stand onto the
bottom of the main unit until you hear a
click.
EN 13