Formosa KWA-O6020-I User Manual page 15

IP Settings (Bridge)
This is available only under Bridge network mode. Open "TCP/IP Settings" in "System" as below to
configure the parameters for LAN which connects to the LAN port of KWA-O6020-I . In this page, users
may change the settings for IP Address, Subnet Mask, and DHCP Server.
Figure 5 IP Settings (Bridge)
Obtain IP Address Automatically: If a DHCP server exists in your network, you can check this option,
thus KWA-O6020-I is able to obtain IP settings automatically from that DHCP server.
Use Fixed IP Address: Check this option. You have to specify a static IP address, subnet mask,
default gateway and DNS server for KWA-O6020-I manually. Make sure the specified IP address is
unique on your network in order to prevent IP conflict.
IP Settings (Router)
This is available only under Router mode. Open "TCP/IP Settings" in "System" as below to configure
the parameters of KWA-O6020-I for accessing the Internet.