Page 1
TEMPLATE ‘Z’ Templates are Full Size We would like to thank you for purchasing this LaBelle kit. We believe that these are the finest kits of their type on the market today and we hope that you enjoy building it.
Page 2
Stripwood that is colored on one end is used in several different places. Be sure that you cut from the uncolored end of the wood to make your parts. Stripwood colored on both ends can be cut from either end and is used for one particular part. It will be completely used in one assembly. Please keep in mind while building this kit that it is YOUR kit and that you can make it as Spartan or as Detailed as you wish.
Page 3
Cut the door sill (15) to length to fit between the end of the side and Cement Formers (13) to Bumpers (14) Centering in the width and the notch in the bumper and cement in place. flush at the back edges. NOTE: Combine has one (1) wide Bumper for Baggage End.
Page 4
Cut and fit Unscribed Dash Siding (24) which is Pre-Cut to height Cut and Cement the Bevel Casing (26) in place, from Stripwood and cement it to the Window Sections. with one end colored Red. This casing goes next to the end door Cut and Cement the Bevel Casing (27) in place, from Stripwood with one end colored Green.
Page 5
Now Make up Templates “X”, “Y” and “Z” from Card Stock Shown Below is an alternative method for rounding the roof ends or use our optional roof rounding kit, which has these Templates which some people prefer to the method just outlined. pre-made.