Sony MLU-200 Operation Manual page 14

No. : 3 digits (continuous number)
SCN : 3 characters of ASCII to identify the scene
CUT : 4 characters of ASCII to identify the cut
TAK : 3 characters of ASCII for the take number
ST : Status code
• NG : No Good
• KP : KeeP
• OK : Good
COMMENT : 24 characters of ASCII for the
comment
With this menu, key function is as follows;
To scroll in the left direction : Press the F1 key.
To scroll in the right direction : Press the F2 key.
To move to the right end : Press the SF and F1 key.
To move to the left end : Press the SF and F2 key.
To confirm the details of the CUE data : Click the
jog dial or press the
To display the "HEADER DISPLAY" menu :
Press the BS key.
Reading the CUE data of the memory label
1
Display the CUE DATA DISPLAY menu.
2
Position the data transfer area of the MLU-200
over a memory label.
3
Press the ACCESS key.
key.
Editing the CUE data
To edit the CUE data which is read in the CUE DATA
DISPLAY menu, follow the procedure below.
1
Turn the jog dial to move the cursor to the CUE
data to be edited in the CUE DATA DISPLAY
menu.
2
Click the jog dial or press the
nnn:comment
scn CUE 00:00:00:00
cut IN --:--:--:--
taks OUT --:--:--:--
nnn : 3 digits (continuous number)
comment : 80 characters of ASCII for the comment
scn : 3 characters of ASCII to identify the scene
cut : 4 characters of ASCII to identify the cut
tak : 3 characters of ASCII for the take number
s : Status code
• N : No good
• K : Keep
• O : Good
3
Press the BS key.
The cursor appears.
4
Turn the jog dial to move the cursor to the item to
be edited.
5
Click the jog dial or press the
6
Change the data.
To change the data
Press the numerical keys.
key.
key.
(Continued)
11(GB)