Related Manuals for Heinner VMGP001
Summary of Contents for Heinner VMGP001
- Page 1 Instructions Instrucțiuni de utilizare - RO Anleitung - D Eredeti használati utasítás - HU Ръководство за употреба - BG Instrukcja obsługi - PL www.heinner.com VMGP001...
- Page 2 IMPACT DRILL Overview 1.Self-locking Drill chuck 2. Second handle 3. Switch for percussion drilling/drilling 4. Direction switch 5. Locking button 6. Operating switch with speed regulator wheel General Safety Instructions for Electric This device is exclusively for private use! It is not fit for commercial use! Warning: when working with electrical devices the following prevention and safety Instructions are to be observed to avoid fires, electric shocks and physical injuries:...
- Page 3 IMPACT DRILL For safe working: • Keep the working area in order! • Disorder in the working area can give rise to dangers of accidents! Pay attention to the ambient conditions! • Do not leave electric tools under the rain! •...
- Page 4 IMPACT DRILL • Make sure before turning on the tool that the key or setting gauge is removed! • Avoid the accidental starting of the tool! • Never carry an electric tool connected to the power mains with your finger on the switch! •...
- Page 5 IMPACT DRILL The direction switch (4) controls the direction of motion when the machine is used as a screwdriver or if you would like to remove a drilling bit that has become jammed. Using the adjustable bit stop you can fix the depth of blind holes accurately during drilling. Preparing the Drilling Machine Warning! When performing the following work, always ensure that the machine is not connected to the mains power supply...
- Page 6 IMPACT DRILL Care of the Tools Overload Never use excessive force when drilling. Too much pressure reduces the speed of the machine, and the required power is greatly reduced. This may result in overload, which can damage the motor of the drilling machine. When the drilling machine becomes too hot, allow it to run for two minutes without a load and then interrupt working for a short time.
Need help?
Do you have a question about the VMGP001 and is the answer not in the manual?
Questions and answers