Page 1
Instructions Instrucțiuni de utilizare - RO Anleitung - D Eredeti használati utasítás - HU Ръководство за употреба - BG Instrukcja obsługi - PL www.heinner.com VMGA001...
Page 2
CORDLESS DRILL USER MANUAL PLEASE READ AND SAVE THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE Drill warnings: WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock and/or injury. Save all warnings and instructions for future reference. Work area safety ...
Page 3
CORDLESS DRILL Only use safety equipment that has been approved by an appropriate standards agency. Unapproved safety equipment may not provide adequate protection. Power tool use and care Do not force tools. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.
Page 4
CORDLESS DRILL Always wear safety goggles or eye protection when using this tool. Use a dust mask or respirator for applications which generate dust. Use thick cushioned gloves and limit the exposure time by taking frequent rest periods. Vibration caused by hammer-drill action may be harmful to your hands and arms.
Page 5
CORDLESS DRILL If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard. Use only the charger which accompanied your product or direct replacement as listed in the catalogue or this manual.
Page 6
CORDLESS DRILL Parts of your drill: Adjustable Keyless chuck Direction button torque clutch Work light Power trigger Battery Battery charger...
Page 7
CORDLESS DRILL Charging a battery: WARNING: Place the battery pack and charger on a flat non-flammable surface and away from flammable material when re-charging the battery pack. 1. Insert the plug on the charging unit into a power socket and turn the power on if required. 2.
Page 8
CORDLESS DRILL Using your drill: IMPORTANT: Before starting, inspect your drill bit to ensure there is no excessive wear and that it is sharp. Never use a drill bit if it is damaged or blunt. Check that the drill bit is correctly fitted in the chuck and is the correct type for the material you wish to drill a hole in.
Page 9
CORDLESS DRILL RECYCLING Electrical and electronic equipment waste (WEEE) might contain dangerous materials which can have a negative impact on the environment and human health if not collected separately. This item is in conformity with the European Directive EU WEEE (2012/19/EU) and is marked with an electronic and electrical waste logo graphically represented in the image below.
Need help?
Do you have a question about the VMGA001 and is the answer not in the manual?
Questions and answers