Team Blacksheep CAIPIRINHA II Manual page 14

Install TBS gear
The electronics bays on the wings are made to accomodate the TBS FPVision and TBS Wing layer. Assembly
the stack and use the screw holes on the bottom to secure it to the wing. Look at the "Electronics
installation" section later in the manual for more specifics.
R/C receiver
The R/C receiver can be installed in either electronics compartment or transceiver bay on the underside of
the wing. For best performance it is recommended to keep it as far away from the video transmitter (VTX)
as possible. Use velcro-tape to secure it in the frame.
14