Table of Contents
Advertisement
Item # 911625
Model # C601H
USE AND CARE GUIDE
60 GALLON STATIONARY
AIR COMPRESSOR
Questions, problems, missing parts?
Before returning to the store, call
Husky Customer Service
8 a.m – 6 p.m., EST, Monday-Friday
1-888-43-HUSKY
HUSKYTOOLS.COM
THANK YOU
We appreciate the trust and confidence you have placed in Husky through the purchase of this 60 gallon
stationary air compressor. We strive to continually create quality products designed to enhance your home.
Visit us online to see our full line of products available for your home improvement needs. Thank you for
choosing Husky!
Advertisement
Table of Contents
Related Manuals for Husky C601H
Summary of Contents for Husky C601H
- Page 1 HUSKYTOOLS.COM THANK YOU We appreciate the trust and confidence you have placed in Husky through the purchase of this 60 gallon stationary air compressor. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for...
-
Page 2: Table Of Contents
Table of Contents Safety Information ......2 Warranty ..........7 Work Area Safety ......2 Specifications ........7 Personal Safety ......3 Duty Cycle........... 7 Transporting ........3 Tools Required ........8 Air Compressor And Hardware needed (for anchoring) ..8 Pneumatic Tool Safety ....3 Package Contents ....... -
Page 3: Personal Safety
15 ft. Keep proper footing and balance at (0.4 m) from the spraying area and all all times. Proper footing and balance explosive vapors. enables better control of the tool in unexpected situations. HUSKYTOOLS.COM Please contact 1-888-43-HUSKY for further assistance. -
Page 4: Electrical Safety
Safety Information (continued) Risk of Bursting. Do not adjust regulator to result in output ELECTRICAL SAFETY pressure greater than marked maximum pressure of attachment. Do Avoid body contact with grounded not use at pressure greater than the surfaces such as pipes, radiators, ranges, rated maximum pressure of this and refrigerators. -
Page 5: Electrical Safety
The following are tips to remember for the air tools and accessories when setting up the air compressor’s air being used. distribution system. • Use pipe that is the same size as the air tank outlet. Piping that is too small will restrict the flow of air. HUSKYTOOLS.COM Please contact 1-888-43-HUSKY for further assistance. - Page 6 Air Distribution System (continued) • If piping is over 100’ (30.5 m) long, use • A separate regulator is recommended the next larger size. to control the air pressure. Air pressure from the tank is usually too high for • Bury underground lines below the individual air driven tools. frost line and avoid pockets where condensation can gather and freeze. •...
-
Page 7: Warranty
Husky is not responsible for direct, indirect, incidental, special or consequential damages. If this air compressor is used for commercial purposes, the warranty will apply for ninety (90) days from the date of purchase. -
Page 8: Tools Required
Tools Required Safety 9/16 wrench Electric Drill goggles Hardware needed (for anchoring) NOTE: Hardware not shown to actual size..DD ..BB ..CC Part Description Quantity Concrete Anchors 3/8” Lag Screw to fit concrete anchors Shims as needed Package Contents HARDWARE INCLUDED NOTE: Hardware not shown to actual size. - Page 9 Air Compressor Pump: Compresses air into the air tank. Working air is not available until the compressor has raised the air tank pressure above that required at the air outlet. HUSKYTOOLS.COM Please contact 1-888-43-HUSKY for further assistance.
-
Page 10: Assembly
Package Contents (continued) Part Description Drain Valve: The drain valve is located at the base of the air tank and is used to drain condensation at the end of each use. Check Valve: When the air compressor is operating, the check valve is “open”, allowing compressed air to enter the air tank. -
Page 11: Breaking In The Pump
Open the drain valve (F) fully to permit air to escape and prevent air pressure The air compressor is now ready for use. build up in the air tank during the break-in period. HUSKYTOOLS.COM Please contact 1-888-43-HUSKY for further assistance. -
Page 12: Operation
Operation Draining the tank NOTICE: All compressed air systems generate condensate (Figure 2, 4) that accumulates in any drain point (e.g., tanks, filter, WARNING: Risk of unsafe aftercoolers, dryers). This operation. Air tanks contain condensate contains lubricating high pressure air. Keep face oil and/or substances which and other body parts away may be regulated and must be... - Page 13 135 psi. maximum pressure rating. The hose or accessory will require a quick connect plug if the air outlet is equipped with a quick Place Auto/Off switch (A, Figure 5) to connect socket. “Off”. HUSKYTOOLS.COM Please contact 1-888-43-HUSKY for further assistance.
-
Page 14: Maintenance
Operation. The safety valve automatically releases air WARNING: When servicing, use when the receiver pressure exceeds the only identical Husky replacement preset maximum. parts. Use of any other parts may create a hazard or cause product Inspect the tank annually for rust, pin holes, damage. -
Page 15: Air Filter
Place new air filter into filter cover. cool prior to servicing. Replace air filter cover to pump. CAUTION: Keep the air filter clean at all times. Do not operate the air compressor with the air filter removed. HUSKYTOOLS.COM Please contact 1-888-43-HUSKY for further assistance. -
Page 16: Adjusting Belt Tension
Maintenance (continued) BELT GUARD – REMOVAL Belt - Replacement WARNING: Serious injury or Turn air compressor off, lock out damage may occur if parts of the power supply, and relieve all air the body or loose items get pressure from the air tank. caught in moving parts. - Page 17 Apply a soap solution to all air line fittings and connections/piping. Correct any leaks found. NOTICE: Even minor leaks can cause the air compressor to overwork, resulting in premature breakdown or inadequate performance. HUSKYTOOLS.COM Please contact 1-888-43-HUSKY for further assistance.
-
Page 18: Storage
If additional service is operation. required, contact 1-888-43-HUSKY for further Torque to 12–17 ft.-lbs. (16.3–23.0 Nm). assistance. Storage Before you store the air compressor, make... - Page 19 Bring the compressor to a service center. Pulley misalignment. Align pulley/flywheel. Squealing sound Compressor pump has no Check pump oil oil. Loose belt. Check belt tension. Restricted air Dirty air filter. Clean or replace air filter. intake HUSKYTOOLS.COM Please contact 1-888-43-HUSKY for further assistance.
- Page 20 Install water and oil filter traps when needed. The Typical Compressed Air Distribution System provides a guideline. Contact a call Husky Customer Service for more information. IMPORTANT: If the tank or air lines have excessive water and/ or oil, bring the compressor to a service center.
- Page 21 Serrez de 9 À 12 lbs-ft. Torsión hasta 12,2-16,3 N•m Torque to 8 lb-ft. Serrez de 8 lbs-ft. Torsión hasta 10,9 N•m Torque to 5 lb-ft. Serrez de 5 lbs-ft. Torsión hasta 6,8 N•m HUSKYTOOLS.COM Please contact 1-888-43-HUSKY for further assistance.
- Page 22 Parts List - Motor/Pump Assembly ITEM NUMBER PART NUMBER QUANTITY DESCRIPTION SCREW, M4 X 8 LOCK WASHER, M4 042-0112 INLET COVER 118-0032 SCREEN 019-0220 FILTER, FELT SCREW, M8 X 60 LOCK WASHER, M8 042-0108 HEAD ASSEMBLY SCREW, M8 X 35 046-0283 GASKET, HEAD 043-0180...
- Page 23 HEAD AND VALVE PLATE ASSY includes items 1-5, 8, 10, 11 and 12 046-0279 GASKETS, COMPLETE SET includes items 10, 12,15, 21, 27 and 29 040-0354 PUMP ASSEMBLY includes items 1-37 excluding 30-33 HUSKYTOOLS.COM Please contact 1-888-43-HUSKY for further assistance.
- Page 24 Exploded View - Unit Assembly...
- Page 25 RUN CAPACITOR E106009 START CAPACITOR COVER E106010 RUN CAPACITOR COVER E106011 WARNING LABEL E106012 HOT SURFACE WARNING LABEL E106013 DRAIN TANK WARNING LABEL NA: These are standard parts available at your local hardware store. HUSKYTOOLS.COM Please contact 1-888-43-HUSKY for further assistance.
- Page 28 Questions, problems, missing parts? Before returning to the store call Husky Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-888-43-HUSKY HUSKYTOOLS.COM Retain this manual for future use. Document Number: E105592...