Table of Contents
Advertisement
I
n
s
t
a
l
l
i
n
g
I
n
s
t
a
l
l
i
n
The electrical cable is provided separately from the control cable. Before installation
begins, connect the four leads (which include the 3A fuses) using a red or blue
crimp sleeve as appropriate.
Please note sharp edges or moving parts which may damage the wires.
The value for the fuses provided with the kits must not be changed.
Warning!
The kit is appropriate only for a 12V vehicle.
In case of converting any other kit model into this kit, please change the
power cable.
The electrical cables should be directed as follows:
So as not to disturb the driver or passengers.
So as not to pass near the car's sharp or moving parts.
The external voltage connection is located under the dash board or
close to the fuse box (depending on the car model).
Note!
In new vehicles a cellular phone connection can be found near the fuse
box. See the car's user's manual under Info.
Only use the kit's original fuses (250V / 3A).
Installation instructions
t
h
e
E
l
e
g
t
h
e
E
l
e
c
t
r
i
c
a
l
C
c
t
r
i
c
a
l
C
o
n
n
e
c
t
i
o
o
n
n
e
c
t
i
o
n
s
n
s
10
Advertisement
Table of Contents
