Page 1
LIGHT • Insert batteries into controller/charger and connect wire into the socket on the Zipper™. • Make sure Zipper™ is set to OFF and • To change the LED lights, press the LIGHT controller/charger is in the CHG postion. button.
Page 2
1. Turn off the power to the controller/charger. 2. Pull out the cover and take out the charging wire. (pic.4) 3. Turn off the power on the Zipper™. Insert the charging plug into the socket on the Zipper™. (pic.5) 4. Set the “CHG/OFF/ON” selector to “CHG” position.
Page 3
4. Gently press the throttle trigger to raise your Zipper™ about 1.5 to 3 feet high. 5. When the Zipper™ flies steadily, you can slowly increase the throttle trigger to make Zipper™ fly higher, or release the throttle trigger a bit to make Zipper™ fly lower. Only small amounts of trigger position change are required for smooth flying.
- Parental guidance is recommended when flying. Zipper™. Do not use it to charge any other battery other than that in the Zipper™. - Keep your Zipper™ in your sight in order to prevent it from flying out of range. FCC Statements may cause harmful interference to radio communications.
Need help?
Do you have a question about the Zipper and is the answer not in the manual?
Questions and answers