How To Configure And Use A Separate Pcr - Ericsson AVP 4000 Reference Manual

Getting Started
Figure 3.14 Additional Output Service Added
3.7.9

How to Configure and Use a Separate PCR

By default the unit will use PCR embedded in the video. If a separate PCR is
required, complete the following steps:
1. Select Off for Embedded PCR in the Video Component > Output tab.
Figure 3.15 Service Configuration Web Page – Turning Off Embedded PCR
2. Select the Video PCR Stream from the video Inputs list and drag-and-drop it
into the output service.
3. Configure the required PCR PID on this component.
3-28 1/1553-FGC 101 1790 Uen Y