By Off-Line Tool - Bosch FPE-1000-NE Installation Manual

FPA-1000-V2 Network Cards
2.
3.
4.
5.
6.
7.
5.2.3

By off-line tool

Notice!
If the computer is not auto-negotiating capable, use a crossover cable. Otherwise, use a
straight CAT 5 cable or better.
1.
2.
3.
4.
5.
6.
7.
Bosch Security Systems, Inc.
Using an internet browser, enter the IP address of one of the panels to be added to the
network (http://"enter IP address here"/) to navigate to that panel.
Input the default username (operator) and passcode (0000) and click OK.
The Online Start Page opens. Click the LOGIN area in the upper left corner and input the
default level 3 passcode (3333) and click OK to enable programming.
In the left-hand column, click on Networking.
Under Panel List, enter the IP address of a panel to be added to the network.
Click Add
Repeat step 5 for each panel on the network.
At the upper left of the window, click on either Logoff or Implement configuration. The
display prompts that changes to the configuration have been made and asks if you want
to logoff or implement the changes. Choosing Yes to logoff or implement the changes
saves the new configuration and initiates a system reset. During the reset, the new
configuration information is sent to all panels on the network.
Connect a computer to the panel's Ethernet port.
Using an internet browser, enter the IP address of one of the panels to be added to the
network (http://"enter IP address here"/) to navigate to that panel.
Input the default username (operator) and passcode (0000) and click OK.
The Online Start Page opens. Click the LOGIN area in the upper left corner and input the
default level 3 passcode (3333) and click OK to enable programming.
Under Configuration:
Click the checkbox next to Upload configuration (PC_> FPA-1000).
Click Browse, navigate to your computer's home drive, and click on the configuration file
that you prepared for the panel to which you are connected.
When the path displays in the textbox next to Browse, click Upload.
When the display indicates, the upload is completed, disconnect your computer from the
panel.
Repeat the process for each panel on the network.
Installation manual
Panel/network configuration | en
2017.11 | 2.0 | F.01U.214.374
15