Modeling Light - Nissin AIR 10S Instruction Manual

Modeling light

Normal flashguns have a very short flash duration. In order to estimate and
control the flash more efficiently, the modeling light on slave unit can be used.
It is a constant light for the user to estimate and preview the light
before shooting(flash emitting).
(*) Modeling light is a new feature of the NAS system.
Nissin Di700A, i60A, i40 flash and other discontinued
models do not support this feature.
Turn on/off the modeling light
1. Press the Group Selection button(s), the group letter(s) blink.
2. Press
3. Press the Group Selection button again when setup completed.
CAUTIONS CAUTIONS
If you do not press any group selection button, which means all group letter in the TTL auto flash exposure mode of Nissin Air 10s (Canon version) only supports
Canon camera. Other brand cameras or camera models without our compatibility
display do not blink, pressing the modeling light button will invert the modeling on/off
test does not support.
setting of all groups. For example, A & C: On and B & D: off, press the modeling
light button without selecting any group, will cause to A & C: Off, and B & D: On.
to switch the group's modeling on/off.
20