Download Print this page

Pyle PINV5 Owner's Manual page 8

600/800/1000watt

Advertisement

SYMPTOM C: THE LOW OUTPUT OF INVERTER IS MEASURED
POSSIBLE CAUSES
Battery voltage is too low below 10V DC
The inverter is overload
SYMPTOM D: THE LOW BATTERY IS MEASURED
POSSIBLE CAUSES
The poor battery condition
Inadequate power of excessive voltage drop
SUGGESTION
Recharge battery
Reduce load to 600 Watts (PINV4) , 800
Watts (PINV5) and 1000 Watts (PINV6)
maximum to maintain regulation.
SUGGESTION
Recharge battery
Check condition of battery clips and
terminals. Clean or replace as necessary
7

Advertisement

loading

This manual is also suitable for:

Pinv4Pinv6