Safety - JET USA S1000G User Manual

Portable Steam Cleaner

Safety


Do not use outdoors, for household use only.

Do not leave the steam cleaner plugged in while away. Unplug the electrical cord when not in use and before
servicing or cleaning.

Do not allow the Steam cleaner to be used as a toy. Close attention is required when being used near
children, pets and/or plants.

Do not let steam flow in the direction of people, pets or other electronic appliances.

Use the steam cleaner only as described in this manual. Use only recommended accessories from the
manufacturer.

Do not use damaged cord or plug. If the steam cleaner is not working as it should, has been dropped,
damaged, left outdoors or exposed to water, have it repaired in an authorised service centre before using it
again.

Do not pull or carry the steam cleaner by its cord. Use its handle instead. Do not close a door on its cord or
pull the cord around sharp edges or corners. Keep the cord away from heated surfaces.

Do not use the cords or outlets with inadequate current load capacity.

Do not unplug the steam cleaner by pulling on the cord. To unplug, use the plug and not the cord.

Do not handle the plug or steam cleaner with wet/damp hands or without any shoes on.

If the cord is damaged, have it replaced by the manufacturer, its service agent or a qualified person in order
to avoid electrical hazards.

Do not insert any objects into the steam cleaner's openings. Do not use if there are any openings that are
blocked.

Store your steam cleaner in a cool, dry area indoors.

Keep your work area well-lit.

Never turn the steam cleaner on its side for more than 45 degrees in respect to its vertical axis when using it.
Never direct the flow of steam towards people, pets, plants and/or equipment with electrical components.

Do not immerse the steam cleaner in water or other liquids. Always unplug the power cord from the electrical
socket when filling the steam cleaner.

Never put descaling, aromatic or detergent products into the steam cleaner, as this may damage it or make it
unsafe for use.

Metal tips on the nozzle will get very hot during use. Do not touch hot surfaces. Allow the attachments to
cool down before replacing them while the steam cleaner is being used.

Any repair work, including the replacement of the power cord, must be carried out only by a qualified
technician.

The cover must be locked when using the steam cleaner.

Do not use the steam cleaner in or near swimming pools or anything that contains water.

Before filling-up the steam cleaner, proceed as follows:

Unplug the power supply.

Reduce the pressure by pressing the steam button.

Allow the steam cleaner to cool down for three minutes.
2