Table of Contents
Advertisement
ELECTRONIC VOLUME CONTROL
- THIS UNIT USES AN ELECTRONIC VOLUME CONTROL
- TO INCREASE OR DECREASE THE LOUDNESS OF UNIT, PRESS
THE VOLUME UP (VOL +) OR VOLUME DOWN (VOL -) KEYS RESPECTIVELY.
- RELEASE THE KEY WHEN VOLUME LEVEL IS AT THE DESIRED LOUDNESS.
- SOMETIMES, ESPECIALLY DURING LISTENING TO THE RADIO, YOU MAY NOTICE
A "CLICK-CLICK-CLICK" (REPEATING) SOUND WHEN YOU ARE INCREASING OR
DECREASING THE VOLUME. THIS IS A NORMAL CONDITION & THE SOUND WILL
DISAPPEAR WHEN YOU RELEASE THE VOLUME KEY (WHEN YOU REACH THE
DESIRED VOLUME LEVEL).
OPERATION OF RADIO
- PRESS THE "ON/OFF" KEY ONCE TO SWITCH ON THE UNIT.
- PRESS THE
FUNCTION
KEY (ON UNIT) REPEATEDLY UNTIL THE DISPLAY
SHOWS "FM"
OR PRESS THE "TUNER" KEY ONCE ON REMOTE CONTROL
- TO IMPROVE FM-RADIO RECEPTION, FULLY EXTEND THE FM-ANTENNA WIRE
AND ADJUST IT'S POSITION.
- USE THE "FM MODE" KEY (ON REMOTE CONTROL) TO SELECT THE
DESIRED MODE (
FM MONO/STEREO)
POOR, IT MAY BE ADVISABLE TO SELECT "MONO" MODE, TO IMPROVE CLARITY
OF THE RADIO SIGNAL.
MANUAL FREQUENCY ADJUSTMENT (SCAN MODE)
- PRESS (AND IMMEDIATELY RELEASE) THE
KEY TO "SCAN" (MANUALLY ADJUST) THE RADIO FREQUENCY "UP" OR "DOWN"
BY 1-STEP AT A TIME.
- THE RADIO DIGITAL DISPLAY WILL INDICATE THE EXACT FREQUENCY AT EACH
STEP'S POSITION.
- WHEN A DESIRED FREQUENCY OR STATION IS REACHED. IT CAN BE SAVED
INTO ONE OF THE "MEMORY" POSITIONS. (SEE "RADIO MEMORY" SECTION).
AUTOMATIC FREQUENCY ADJUSTMENT (SEEK MODE)
- PRESS AND HOLD (FOR 2 SECONDS) THE
TO "SEEK" (AUTOMATICALLY ADJUST) THE RADIO FREQUENCY "UP" OR "DOWN"
TO THE NEXT AVAILABLE RADIO STATION.
- THE RADIO DIGITAL DISPLAY WILL INDICATE THE EXACT FREQUENCY OF THE
NEXT STATION THAT IS FOUND.
- WHEN A DESIRED STATION IS REACHED. IT CAN BE SAVED INTO ONE OF THE
"MEMORY" POSITIONS. (SEE "RADIO MEMORY" SECTION).
RADIO MEMORY (STATION PRESET MEMORY STORAGE)
- AT ANY TIME, THE CURRENTLY DISPLAYED STATION OR FREQUENCY CAN BE
STORED INTO ONE OF THE MEMORY POSITION.
- PRESS
PROGRAM
KEY ONCE.
- PRESS
OR
KEY ON THE REMOTE CONTROL TO SELECT
RADIO M+
RADIO M-
DESIRED MEMORY POSITION. (THERE ARE 30 MEMORY POSITIONS FOR FM BAND).
- PRESS
PROGRAM
KEY ONCE TO SAVE THE SELECTED STATION INTO THE
SELECTED MEMORY POSITION.
- TO RECALL ANY SAVED MEMORY, SIMPLY PRESS
THE SAVED RADIO-BAND WILL BE RECALLED.
- TO CLEAR THE MEMORY OF ANY POSITION, SIMPLY SAVE A NEW STATION TO
THE SAME MEMORY POSITION.
(PUSH BUTTON TYPE)
. IN SOME CASES, WHERE RECEPTION IS
NEXT
BACK
KEY OR
OR
KEYS
NEXT
BACK
RADIO M+
OR
RADIO M-
E-9
OPERATION WITH THE iPod/ iPhone
.
THIS UNIT IS DESIGNED TO ALLOW YOU TO CONNECT AN
NEED FOR DOCK CONNECTORS. THE DESIGN OF THE UNIT HAS BEEN STRUCTURED
TO PROVIDE SUPPORT TO TE CONNECTOR UNDER NORMAL USAGE WITHOUT EXCESSIVE
PRESSURE ON THE
SCREEN.
- TURN ON BOTH THE UNIT AND THE iPod/ iPhone.
- PRESS THE
FUNCTION
OR SIMPLY PRESS THE "DOCK" KEY ON REMOTE CONTROL.
- THE UNIT WILL AUTOMATICALLY START PLAYBACK OF THE SONGS.
- THE iPod
/ iPhone
SONG (TRACK).
- AT ANYTIME DURING PLAYBACK, PRESS THE
TO PAUSE OPERATION OF THE UNIT. PRESS
OPERATION AT THE SAME TRACK & POSITION.
.
- AT ANYTIME DURING PLAYBACK, PRESS & HOLD THE
TO STOP PLAYBACK OF UNIT.
- AT ANYTIME DURING PLAYBACK, PRESS AND RELEASE THE
BACK/ TUNE -
CONTROL) TO SKIP FORWARD OR BACKWARDS BY ONE TRACK, AS DESIRED.
- ANY ANYTIME DURING PLAYBACK, PRESS AND HOLD THE
BACK/ TUNE -
CONTROL) TO FAST-FORWARD (CUE) OR FAST-REVERSE (REVIEW)
THE SPECIFIC TRACK, WHICH IS CURRENTLY PLAYING.
- YOU CAN OPERATE THE iPod
OR DIRECTLY WITH THE iPod
- WHEN THE iPod
/ iPhone
CHARGING THE BATTERY OF THE iPod
- NEVER REMOVE (OR UNPLUG) THE iPod/ iPhone FROM THE SET DURING PLAYBACK,
ALWAYS PRESS & HOLD FOR 2 SECONDS THE
PRESS THE
FUNCTION
OR "AUX") BEFORE REMOVING OR UNPLUGGING THE iPod/ iPhone,
TO PREVENT DAMAGE TO YOUR SONG FILES OR MEMORY DEVICES.
"Made for iPod," "Made for iPhone," mean that an electronic accessory has
been designed to connect specifically to iPod, iPhone, respectively, and has been certified
by the developer to meet Apple performance standards. Apple is not responsible for the operation
of this device or its compliance with safety and regulatory standards. Please note that the use
of this accessory with iPod, iPhone may affect wireless performance.
REPEAT PLAYBACK FUNCTION (iPod/ iPhone)
- AT ANYTIME DURING iPod/ iPhone PLAYBACK:
3D-VIRTUAL SURROUND
- PRESS THE "PLAY MODE" KEY ON REMOTE CONTROL OR
PRESS THE FOLLOWING SYMBOLS ON THE iPod/ iPhone SCREEN:
= TO REPEAT THE CURRENT TRACK
,
= TO REPEAT ALL TRACKS
iPod/ iPhone
WHEN CONTROLLING PLAYBACK USING THE
KEY REPEATEDLY UNTIL THE DISPLAY SHOWS "iPod"
DISPLAY WILL INDICATE THE INFORMATION OF THE CURRENT
PLAY/PAUSE
PLAY/PAUSE
KEYS ON UNIT (OR "iPod NEXT/ iPod BACK" KEY ON REMOTE
KEYS ON UNIT (OR "iPod NEXT/ iPod BACK" KEY ON REMOTE
/ iPhone
USING EITHER THE SET, REMOTE CONTROL
/ iPhone
ITSELF.
HAS BEEN CONNECTED WITH THE UNIT, IT WILL START
/ iPhone
.
PLAY/PAUSE
KEY TO SWITCH TO ANOTHER SOURCE (EG. "RADIO"
E-10
iPod/ iPhone
WITHOUT THE
iPod/ iPhone
KEY
KEY TO RESUME
KEY
PLAY/PAUSE
NEXT/ TUNE +
OR
NEXT/ TUNE +
OR
KEY FIRST AND THEN
Advertisement
Table of Contents
