Table of Contents
Advertisement
DIGITAL CLOCK FUNCTION
- THE SET HAS A BUILT-IN DIGITAL CLOCK, WHICH IS DISPLAYED IN 2 SITUATIONS:
(1) WHEN THE SET IS IN "STANDBY MODE". (THE DISPLAY WILL CONTINUOUSLY
SHOW THE CURRENT TIME). IN THIS SITUATION THE BLUE BACKLIGHT
IS NORMALLY DIMMED (TO SAVE ELECTRICITY) BUT YOU CAN SWITCH ON
THE BLUE DISPLAY LIGHT BY PRESSING THE "CLOCK SET" KEY OR "TIMER" KEY
ON REMOTE CONTROL. THIS WILL ACTIVATE THE BLUE LIGHT FOR
APPROXIMATELY 10 SECONDS.
(2) WHEN THE SET IS IN "ON MODE" (THE BLUE LIGHT OF THE DISPLAY IS "ON" IN
THIS MODE, TO INDICATE THAT THE SET IS POWERED "ON"). IN THIS SITUATION
THE LCD DISPLAY NORMALLY DOES NOT AUTOMATICALLY SHOW THE CURRENT
TIME. BUT YOU CAN PRESS THE "DISPLAY" KEY (ON REMOTE CONTROL)
TO SEE THE CURRENT TIME.
HOW TO SET CORRECT TIME:
SWITCH UNIT TO "STAND-BY" MODE (DISPLAY LIGHT = DIMMED)
PRESS & HOLD CLOCK SET KEY UNTIL THE "HH" HOUR DISPLAY IS
FLASHING.
PRESS NEXT OR BACK REPEATEDLY TO SET THE CORRECT
IN THE DISPLAY & PRESS THE CLOCK SET KEY TO CONFIRM.
PRESS NEXT OR BACK REPEATEDLY TO SET THE CORRECT
MINUTE
IN THE DISPLAY & PRESS
CORRECT TIME IS NOW SET & WILL BE SHOWN IN THE DISPLAY.
HOUR
CLOCK SET KEY
TO CONFIRM.
E-7
AUTOMATIC POWER ON/OFF TIMER FUNCTION
- THIS SET HAS A TIMER FUNCTION TO ENABLE YOU TO PROGRAM THE UNIT TO
AUTOMATICALLY SWITCH "ON" OR "OFF" AT PRESET TIMES. THIS IS USEFUL AS A MORNING
ALARM CLOCK :
HOW TO SET TIMER
1. PRESS AND HOLD TIMER KEY (ON REMOTE CONTROL). THE
APPEARS IN THE DISPLAY.
2. PRESS NEXT OR BACK TO ADJUST THE HOUR OF THE DESIRED "ON" TIME
AND THEN PRESS TIMER KEY TO CONFIRM.
3. PRESS NEXT OR BACK TO ADJUST THE MINUTES OF THE DESIRED "ON" TIME
AND THEN PRESS TIMER TO CONFIRM.
4. NOW THE WORDING IN THE DISPLAY CHANGES TO SHOW
5. PRESS NEXT OR BACK TO ADJUST THE HOUR OF THE DESIRED "OFF" TIME
AND THEN PRESS TIMER TO CONFIRM.
6. PRESS NEXT OR BACK TO ADJUST THE MINUTES OF THE DESIRED "OFF" TIME
AND THEN PRESS TIMER TO CONFIRM.
7. NOW THE DISPLAY WILL INDICATE THE "WAKE UP MODE" (iPod OR RADIO OR CD).
PRESS NEXT TO CHOOSE THE DESIRED MODE & PRESS TIMER TO CONFIRM.
8. THE DISPLAY THEN SHOWS THE "WAKE UP VOLUME LEVEL" (LOUDNESS).
PRESS BACK OR NEXT TO DECREASE OR INCREASE THE VOLUME LEVEL TO BE
USED FOR THE MUSIC TO BE PLAYED WHEN THE TIMER SWITCHES ON THE UNIT AT THE
PRE-SET TIME.
9. PRESS TIMER TO CONFIRM.
10. FINALLY THE UNIT WILL RETURN TO THE NORMAL DISPLAY, EXCEPT THAT THE
SYMBOL WILL BE SHOWN, TO INDICATE THAT YOU HAVE PROGRAMMED A ON/OFF ALARM
SETTING.
11. IN CASE YOU WISH TO DISABLE THE TIMER, PRESS THE
& THE
SYMBOL WILL DISAPPEARS.
TIMER
(NOTE : THE AUTOMATIC ON/OFF TIMER WILL SWITCH ON THE UNIT AS IF YOU HAVE
MANUALLY PRESSED THE "ON/ STANDBY" KEY. IF YOU HAVE SELECTED "WAKE TO RADIO",
THE EXACT PRESET RADIO BAND & STATION WILL BECOME ACTIVATED WHEN POWER
SWITCHES ON).
AUTOMATIC POWER OFF SLEEP FUNCTION
- THIS SET HAS A SPECIAL SLEEP TIMER FUNCTION WHICH CAN AUTOMATICALLY
SWITCH OFF THE UNIT. THIS IS USEFUL FOR SLEEPING TO MUSIC AT NIGHT.
- AT ANY TIME WHILE THE UNIT IS OPERATING, PRESS
(ON REMOTE CONTROL) REPEATEDLY TO CHOOSE THE AUTOMATIC
POWER OFF TIME.
90
80
70
60
MINS
MINS
MINS
MINS
(*OFF MEANS SLEEP TIMER IS DEACTIVATED)
ON TIME
OFF TIME
.
TIMER KEY ONCE,
SLEEP
KEY
50
40
30
20
MINS
MINS
MINS
MINS
MINS
E-8
SYMBOL
TIMER
10
OFF*
Advertisement
Table of Contents
