Specifications - Luxman P-750u Owner's Manual

Specifications

Rated output
Input sensitivity
Input impedance
Total harmonic distortion
S/N ratio
Frequency response
Supplied functions
Accessories
Power supply
Power consumption
Max. external dimensions
Weight
* Specifications and appearance are subject to change without notice.
UNBAL : 4 W + 4 W (8 Ω), 1 W + 1 W (32 Ω)
BAL : 8 W + 8 W (16 Ω), 4 W + 4 W (32 Ω)
[UNBAL: PHONES-1 output, BAL: PHONES-2 output, PHONES-3 output,]
LINE → UNBAL : 1 V (SENSITIVITY HIGH)
BAL LINE → BAL : 2 V (SENSITIVITY HIGH)
LINE → BAL : 2 V (SENSITIVITY HIGH)
BAL LINE → UNBAL : 1 V (SENSITIVITY HIGH)
LINE : 15 kΩ (THROUGH OUT OFF)
BAL LINE : 40 kΩ
LINE → UNBAL : 0.003 % (8 Ω, 1 kHz, 1 W, both CHs simultaneous drive)
BAL LINE → BAL : 0.002 % (16 Ω, 1 kHz, 1 W, both CHs simultaneous drive)
LINE → UNBAL : 113 dB or more (IHF-A weighted, input short)
BAL LINE → BAL : 116 dB or more (IHF-A weighted, input short)
LINE → UNBAL : 20 Hz to 20,000 Hz (+0, –0.1dB)
10 Hz to 170,000 Hz (+0, within –3 dB)
BAL LINE → BAL : 20 Hz to 20,000 Hz (+0, –0.1dB)
10 Hz to 170,000 Hz (+0, within –3 dB)
• Balance control
• Headphone output selection
• Input selection
• Unbalanced headphone jack (PHONES-1) ×1 line
• 4-pin XLR balanced headphone output (PHONES-2) ×1 line
• 3-pin XLR balanced headphone output (PHONES-3) ×1 line
• Owner's Manual (This document)
• Safety cautions
230 V 〜 (50 Hz)
40 W
27 W (at no input)
440 (W) × 92 (H) × 400 (D) mm
(front side knob of 14 mm and rear side terminal of 6 mm included in depth)
13.3 kg (main unit)
HEADPHONE AMPLIFIER P-750u
• Sensitivity selection
• Through output selection
• Power cable
12