Install Batteries; How To Play - Lifemax 1616012 Assembly Instructions Manual

Install Batteries

Battery Box: Unscrew bolt using a screwdriver and open the battery box. Insert 2 "AA" batteries ( not included) in
the order of polarity as shown on the inside cover. Then close the cover using a screwdriver. Turn the power ON
using the ON/OFF switch.
Reminding:
a. Batteries must be installed according to the correct polarization (+ and -) required.
b. Please clean the battery contacts and also those of the device prior to battery installation.
c. If the game will not be used for a long period of time, we recommend that the batteries should be removed.
!
1) Require 2 pcs "AA" Batteries (Not included).
2) Do not mix old and new batteries.
3) Do not mix alkaline, standard (carbon zinc), or rechargeable (nickel - cadmium) batteries.

How to play

1. When HOME/VISITOR indicates "0", therewith starting the game.
2. When the "HOME" player scores a point, the "HOME" indicator will show 1 point and with a beep sound. On the
contrary, when the "VISITOR" player scores a point, the "VISITOR" indicator will show 1 point and with a beep sound.
3. The first player to reach 10 points wins the game, and the winner's indicator will stay at 9 points and flash for seconds.
4. After the game, you can press "RESET" button to start a new game and the HOME/VISITOR will indicate "0".
Note:
1. You can press "RESET" button at any time, to set the scorer back to the beginning status.
2. You can press "ON/OFF" at any time to turn off the scorer. Press "ON/OFF" button again to turn it back on.
1616012
ELECTRONIC SCORER OPERATION
WARNING:
(Continued on the next page.)
8
www.themdsports.com