Table of Contents
Advertisement
5
X 1
X 2
6
7
X 1
X 2
9
X 2
10
11
X 2
14
X 2
X 1
15
A2
X 2
A7
X 2
X 12
A6
A8
X 2
A2
FIG.3
8. Attach the Connect Box (#7) near the side apron using two Screws (#A7). Thread the wire from Goal Box (#11)
through the openings of the end aprons and support of the playfield to insert the Wire into the Connect Box (#7).
See FIG. 3A & 3C.
9. Attach the Goal Boxes (#11) to each End Apron using three Screws (#A6).
10. Attach the Electronic Scorer (#5) to the Scorer Poles (#6) using two Bolts (#A8) and two Nuts (#A2).
Thread the Scorer Wire through the Scorer Pole (#6) and the opening of the side apron to Insert the Scorer Wire into
the Connect Box (#7).
11. Attach the Pole Bracket (#14) to the side apron in the pre-drilled holes using two Screws (#A6) and Insert the Scorer
Pole (#6) into Pole Bracket (#14) using one Screw (#A6).
12. Tear off the backside paper of the Felt Pad (#10) and stick them at the bottom of the Pushers (#9).
13. Insert the Adaptor (#15) into the DC Motor (#P1).
1616012
FIG. 3
11
A6
A8
See FIG. 3 & 3B and 3C.
(Continued on the next page.)
5
6
6
A6
14
6
10
See FIG. 3.
See FIG. 3E.
7
A7
7
7
scorer wire
11
A6
P1
15
9
See FIG. 3.
(Continúe en la siguiente página.)
goal wire
goal wire /
See FIG. 3D.
www.themdsports.com
Advertisement
Table of Contents
