Ic Radiation Exposure Statement - Dell T01C001 User Manual

Hide thumbs

Table Of Contents

Table of Contents

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d'en

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

FCC RF Exposure Information (SAR)

This device is designed and manufactured not to exceed the emission limits for exposure to

radio frequency (RF) energy set by the Federal Communications Commission of the United

States.

During SAR testing, this is set to transmit at its highest certified power level in all tested

frequency bands, and placed in positions that simulate RF exposure in usage near the body

with the separation of 0mm. Although the SAR is determined at the highest certified power

level, the actual SAR level of the device while operating can be well below the maximum

value. This is because the device is designed to operate at multiple power levels so as to use

only the power required to reach the network. In general, the closer you are to a wireless base

station antenna, the lower the power output.

The exposure standard for wireless s employs a unit of measurement known as the Specific

Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.

This device is compliance with SAR for general population /uncontrolled exposure limits in

ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods

and procedures specified in IEEE1528. This device has been tested, and meets the FCC RF

exposure guidelines when tested with the device directly contacted to the body.

Dell code

Thunderbird (WLAN-only)

Yellowtail (WLAN-only)

SAR compliance for body operation is based on a separation distance of 0mm between the

unit and the human body.