Equinox Systems EQ-618B Operating Instructions page 2

TABLE OF CONTENTS :
I. Features
II. Specifications
III. Front Panel Description
IV. Operation Instruction
V. Battery Replacement
2
V. Battery Replacement
The battery symbol " " appears on the lower right of the
LCD when the 9V battery needs to be replaced. Replace the
9V battery as follows :
1. Turn the meter off.
2. Remove the large flat-head screw on the rear of the
meter to remove the probe holder.
3. Remove the rubber holster that surrounds the entire
meter by pulling it over the top of the meter.
4. Remove the small Phillips head screw on the rear of the
meter.
5. Open the battery compartment and replace the 9V
battery.
6. Re-assemble the meter before operating.
= = = = =
7