Analogue Tv Menu System; Picture Menu - JVC LT-32HG25J Instructions Manual

Highlight Yes or No by using " " or " " buttons and
press OK button to confi rm.
If Yes is selected, automatic search starts.
Selecting No cancels automatic search.
After search is complete, you may see a "Choose
region" box on-screen. Press " " or " " buttons to
change region and press OK to confi rm.
Manual Search
In Manual Search, the number of the multiplex is entered
manually and only that multiplex is searched for the
channels. For every valid channel number, signal level
and signal quality are shown on the screen.
In both manual and auto search any existing channel
in the database is not re-stored to avoid redundant
duplicates of that channel.
First Time Installation
The user can use this item to load default settings,
which were loaded to the receiver at the factory.
To install factory settings, highlight "First Time
Installation" menu item and press OK button, then
you will be asked whether or not to delete the settings.
Selecting "Yes" by pressing OK button while the "Yes"
is highlighted, will delete the existing channel table.
After deleting the channel table a message asking to
start an automatic DIGITAL channel scan appears
Select YES and follow the on screen prompts as
described in initial settings on page 14.

Analogue TV Menu System

Picture Menu

Mode
For your viewing requirements, you can set the related
mode option.
Press " " or " " button to select Mode. Press "
" or " " button to choose from one of these options:
Natural, Cinema and Dynamic..
Contrast/Brightness/Sharpness/Colour/
Hue
Press " " or " " button to select the desired option.
Press " " or " " button to set the level.
Note: Hue option can only be visible when the TV receives
an NTSC signal.
Colour Temp
Press " " or " " button to select Colour Temp.
Press " " or " " to choose from one of these options:
Normal, Warm and Cool..
Note:
• For normal colours, select Normal option.
• Setting Warm option gives white colours a slight red
stress.
• Setting Cool option gives white colours a slight blue
stress.
Noise Reduction
If the broadcast signal is weak and the picture is
noisy, use Noise Reduction setting to reduce the
noise amount.
English - 22 -