Safeguarding The Environment; Declaration Of Conformity; Cleaning And Maintenance - Hotpoint TT 22E Operating Instructions Book Manual

Table of Contents

Advertisement

The function is not available on levels 1 and
2; in these cases, when the reheat button is
hold down, the display will quickly flash 3 times
and Reheat function will be turned off.
Toast any items only until they are golden
brown and not brown or too dark.
Remove any burnt edges. Do not over-toast food
containing starch - especially grain and potato
products - to reduce the production of acryl
amides.
If a slice gets stuck at the end of the toasting
process, pull the power plug and carefully remove
the bread after the toaster has cooled down.
The use of browning levels from 4 to 6 is
recommended
sandwiches.
Depending on the quantity or quality of
stuffing, it can happen that the inside of the
sandwich is not warm enough or completely melt:
in case, please leave the sandwich into the slot for
about one minute after ending the toasting.
USING THE WARMING RACk
The food that cannot be placed inside the slots (e.g.
rolls, baguettes, croissants) can be warmed on the
warming rack
1.
Place the support on the slot (see pic. 1 and 2)
2.
Use the button to set the desired toasting level.
3.
Pull down the operating lever until it engages.
Never place aluminium foil on the warming
rack. Never warm and toast at the same
time!
Only set browning levels 1 and 2 when
using the warming rack with the four-slots
toaster.

CLEANING AND MAINTENANCE

1.
Wipe the outside with a soft dry cloth after the
toaster has cooled down. Never use metal polish.
2.
Pull out the crumb tray from the bottom of
the toaster and empty it. If the toaster is used
frequently, accumulated bread crumbs should be
removed at least once a week. Make sure the
crumb tray is completely closed before using the
toaster again.
3.
When the toaster is not used or is stored, the power
cord may be wound under the bottom of the toaster.
for
the
preparation
4.
If you use specific products for cleaning steel, be
careful with the chrome parts, to avoid staining.

SAFEGUARDING THE ENVIRONMENT

DISPOSAL OF PACkAGING MATERIALS
The packaging material is 100%
recyclable and is marked with the recycle
symbol (*). The various parts of the
packaging must therefore be disposed of
responsibility and in full compliance with
local authority regulations governing waste disposal.
SCRAPPING OF HOUSEHOLD APPLIANCES
of
When scrapping the appliance, make it unusable by
cutting off the power cable and removing the doors
and shelves (if present) so that children cannot easily
climb inside and become trapped.
This appliance is manufactured with
recyclable (*) or reusable materials.
Dispose of it in accordance with local
waste disposal regulations.
For further information on the treatment,
recovery and recycling of household electrical
appliances, contact your competent local authority,
the collection service for household waste or the store
where you purchase the appliance.
This appliance is marked in compliance with European
Directive 2012/19/EU, Waste Electrical and Electronic
Equipment (WEEE).
By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences
for the environment and human health, which could
otherwise be caused by inappropriate waste handling
of this product.
The symbol (*) on the product or on the
accompanying documentation indicates that
it should not be treated as domestic waste
but must be taken to an appropriate
collection centre for the recycling of electrical
and electronic equipment.

DECLARATION OF CONFORMITY

This appliance has been designed, constructed and
distributed in compliance with the safety requirements
of European Directives:
2006/95/EC Low Voltage Directive
en
9 9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tt 44e

Table of Contents