Table of Contents
Advertisement
en
• Do not use extension leads, multiple sockets or adapters. Do not connect the
appliance to a socket which can be operated by remote control.
• The power cable must be long enough for connecting the appliance, once fitted
in its housing, to the main power supply.
• Do not pull the power supply cable.
• If the power cable is damaged it must be replaced with an identical one. The
power cable must only be replaced by a qualified technician in compliance
with the manufacturer instructions and current safety regulations. Contact an
authorized service center.
• Do not operate this appliance if it has a damaged mains cord or plug, if it is not
working properly, or if it has been damaged or dropped. Do not immerse the
mains cord or plug in water. Keep the cord away from hot surfaces.
• Do not touch the appliance with any wet part of the body and do not operate it
when barefoot.
ELECTRICAL CONNECTIONS
Fuse replacement
If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to
change a fuse in this type of plug use an A .S .T .A . approved fuse to BS 1362 type
and proceed as follows:
B
Socket outlet / plug
If the fitted plug is not suitable for your socket outlet, contact After-Sales Service for
further instruction. Do not attempt to change the plug yourself. This procedure needs
to be carried out by a qualified technician in compliance with the manufacturer's
instructions and current standard safety regulations.
6 6
1. Remove the fuse cover (A) and fuse (B)
2. Fit replacement 13A fuse into fuse cover
A
3. Refit both into plug
Important:
The fuse cover must be refitted when changing a
fuse and if the fuse cover is lost, the plug must not
be used until a correct replacement is fitted. Correct
replacements are identified by the colour insert or the
colour embossed in words on the base of the plug.
Replacement fuse covers are available from your local
electrical store.
Advertisement
Table of Contents
