MAGINON IPC-100AC Operating Instruction page 31

1. In the program supra IPCam Config, click on "Start search". After
the camera has been found and is highlighted, check whether
a new update exists for the camera. Click on "Information and
select "Update". Install all offered updates. After a successful
update please wait until the camera has been restarted. You can
click on "Browser" at this point to access the camera directly. Use
user name "admin" without password. Page 58 explains how the
password can be changed. Select "Setup" option for further set-
up of the camera.
2. Select "Maginon IPC-100AC" as camera model and click on "OK".
This calls up the existing settings of the camera.
3. In order to set up the camera for use via supra space select the
third option "Camera with supra space during the next step
(recommended)".
4. Enter any name for the camera in the next window, describing,
for instance, the location.
AFTER SALES SUPPORT
1 800 623 432
AUS
AUS
Start
37