sfty Sense Manual page 6

Placing and Mounting
Place the bracket to the ceiling using the glue pads, then mount it with the
screws. You will not be able to place the Sense in the bracket without batteries.
Remember to place the batteries in the right direction, look for the +/- in the
battery compartment. Place the battery with the + end first and then press
firmly down.
• Do NOT place the Sense nearby air conditioners that could prevent the
smoke reaching the detector sensor.
• Do NOT place the Sense near ovens or other sources that provide cooking
fumes or steam. This can cause false alarms.
• Do NOT try to insert the Sense in the bracket without batteries.
Give the motion sensor some room
Your should try to position your sfty Sense at least 1m from any wall, to allow
its motion sensor a decent area to detect movement. If you are mounting your
Sense on a pitched roof, be sure to place it at least 1m from the top.
Find a spot with great WiFi coverage
Since sfty Sense relies on your WiFi, make sure that the spot you choose has
good or great coverage. A weak WiFi signal will make it less reliable and also
reduce the battery life of the sfty Sense.
6