Philips HTS3106/F7 C Service Manual page 25

Error Code
2042 LdParamClear ERROR0
2043 LdParamClear ERROR1
2044 LdParamClear TIME OUT
2051 IopSet NG
2052 IopSet ERROR0
2053 IopSet ERROR1
2054 IopSet TIME OUT
2055 IopSet ERROR0
2056 IopSet ERROR1
2057 IopSet TIME OUT
2058 CD Iop LIMIT NG
2059 DVD Iop LIMIT NG
2060 BD Iop LIMIT NG
2081 LdParamVerify NG
2091 AtapiComCheck NG
2101 ID4 OFF NG
2111 SET BOR RATE NG
2200 Genaration NG
6001 Factory Info save Error
6002 Factory Info save Error
6100 Factory Info save Error
5. Saving The Pre-Operation OPU DATA
OPU DATA before performing the OPU DATA write is saved in a folder automatically.
5-1. When the OPU DATA write operation has been completed successfully, a folder named [FactoryInfo] is
created in the application folder (OpuDataWriter).
5-2. In the [FactoryInfo] folder, a folder is created monthly in which text file data are saved.
This text file is created with a file name of the OPU serial number and contains the pre-operation OPU DATA.
5-3. The text file is necessary for analyzing the defective BD Mechanism. Submit this text file with the defective
BD Mechanism as necessary to the appropriate managing Department.
Error
Cannot initialize LD Parameter.
Cannot initialize LD Parameter.
Cannot initialize LD Parameter (TimeOut).
Iop Set Error
Iop Set Error
Iop Set Error
lop Set Error (TimeOut)
Iop Set Error
Iop Set Error
lop Set Error (TimeOut)
CD Iop exceeds limit value.
DVD Iop exceeds limit value.
BD Iop exceeds limit value.
LD Parameter Verify Error
BE start Error.
Cannot set ID4 OFF.
Failed to change Serial Connection Rate.
Generation detect failure.
Failed to create FactoryInfo file.
Failed to create FactoryInfo file.
Failed to create FactoryInfo file.
Description
Pre-operation OPU DATA text file
Year(2010)Month(12)
1-8-6 HT3.5(2D)_HT_AIR