Maintenance And Troubleshooting; Possible Solutions - Life Fitness ATV15-XXXA-02 Operation Manual

15” attachable tv (atsc/ntsc/qam)
Hide thumbs Also See for ATV15-XXXA-02:
Table of Contents

Advertisement

Maintenance & Troubleshooting
The Attachable TV System requires little maintenance and has been designed to withstand the environment
of a fitness facility. However, please review our suggestions on cleaning and troubleshooting your Attachable TV Sys-
tem.
Cleaning
Regularly (at least once a week) clean the Attachable TV and cardio equipment using mild soap and water. Lightly
dampen a soft clean cloth with the mild soap and water solution and wipe the product. Do not use too much solu- tion
on the cloth and do not spray or pour any solution directly on the products. Doing so could cause damage to the LCD
panel or remote controls.
Caution: Do not use liquid cleaners or aerosol cleaners to clean the screen. Do not use any solvents such as alcohol
and paint thinner or acidic cleaners.
Troubleshooting
If you are having a problem with your TV, try the suggestions below and on the next several pages. If the problem
persists, contact Life Fitness Customer Support Services as outlined in the front of this manual.
Problem
Reset the TV to factory settings
No picture, no sound
Poor or no picture, good sound
Good picture, no sound
No color

Possible Solutions

Refer to the Option Menu for instruction on how to ac-
cess the Reset option.
Make sure the power cord is plugged in.
Be sure the power is on by pressing the on/off button on
the remote control.
Choose an alternate channel using the channel up/down
arrow keys.
Refer to the Picture Menu. Adjust the options as instruct-
ed to improve the picture quality.
Check the antenna and/or cable connections. Have your
service provider confirm that the signal level is in the ac-
ceptable range. For Air type, the signal level should be in
-83~-8dBm (25.75~100.75dBμv). For Cable type, the sig-
nal level should be in -62~-30dBm (46.75~78.75dBμv).
Press the volume up key on the IR TV remote control or
press the right volume key on the LF TV remote control.
(Headphones are required to hear sound.)
Check the antenna and/or cable connections.
Confirm the correct color format is selected. Refer to the
System Setup section for instruction on how to access the
country option within the TV Install Menu.
Refer to Main On Screen Display Menu on how to access
the Picture Menu. Adjust the Brightness, Contrast, Color,
Tint, and Sharpness options as to improve the picture
quality.
35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents