Getting Started
Select Signal Configuration
After you install the Attachable TV and have connected all the power and cable or antenna, turn
the TV ON. You must select a signal configuration based on your location before continuing.
1. Type 9875 using the numeric keypad.
2. Scroll through the TV System Select menu options in the upper left hand using the UP and
DOWN arrow keys on the LF TV Remote.
3. Select the desired option and press ENTER. The TV will turn off and any previously scanned
channels will be cleared / reset.
• ATSC + NTSC (Digital and Analog - U.S. This is the Default Setting)
• NTSC
• PAL-M + PAL-N (Analog - Brazil, Argentina, and Uraguay).
4. Press the Power key for 5 seconds. Input password to enter the Main On Screen Display (OSD).
Note: The factory default password is "0000." Password can be changed in the Manager Control
Menu.
14