1. Manuals
  2. Brands
  3. Nitto Kohki Manuals
  4. Controller
  5. RC1000
  6. Instruction manual

Nitto Kohki RC1000 Instruction Manual

Professional tool remote controller
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION
MANUAL
Indoor Use Only
ESD Protection
[Specifications]
Mass g (lbs)
Service life
No. of times infrared light
Compatible electric screwdriver
ESD* protection
* ESD is the abbreviation of Electro-Static Discharge. It means the discharge of static electricity.
z Please read manual carefully before you attempt to use your tool so that you may use it properly and safely.
z
z Keep the manual handy - so you can use it whenever necessary.
z
• Due to continuous product development/improvement the specifications and configurations in
this document are subject to change without prior notice.
Manufactured by.
NITTO KOHKI CO., LTD.
EN
FR
DE
IT
ES
PT
SC
http://www.nitto-kohki.co.jp/e/
Model
Battery
Continuous standby
hours
is emitted
Refer to the attached "Electric Screwdriver Model List".
9-4, Nakaikegami 2-chome, Ohta-ku, Tokyo, 146-8555, Japan
Tel : +81-3-3755-1111 Fax : +81-3-3753-8791
Professional tool
REMOTE CONTROLLER
Model: RC1000
This instruction manual is written in English.
Instruction manuals in other languages can be
downloaded from the URL below.
Ce manuel d'instructions est rédigé en anglais.
Les manuels d'instructions dans d'autres langues
peuvent être téléchargés à partir de l'URL
ci-dessous.
Diese Bedienungsanleitung ist auf Englisch verfasst.
Bedienungsanleitungen in anderen Sprachen können von
der unten genannten URL heruntergeladen werden.
Il presente manuale di istruzioni è redatto in lingua
inglese.
I manuali di istruzioni in altre lingue possono essere
scaricati dal seguente URL.
Este manual de instrucciones está escrito en inglés.
En la dirección URL indicada abajo se pueden descargar
los manuales de instrucciones en otros idiomas.
Este manual de instruções está escrito em inglês.
Pode descarregar os manuais de instruções nos outros
idiomas a partir do URL indicado abaixo.
本说明手册的语言是英文。
其他语言的说明手册可从以下 URL 下载。
RC1000
110 (0.24)
(including 3 batteries that come with the controller)
3 Alkaline AAA Batteries
250 hours (Please refer to p. 8 for details.)
10,000 times (Please refer to p. 8 for details.)
Compliant with IEC61340-5-1
(Original Instructions)
TV07529-1 07/2017

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RC1000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Nitto Kohki RC1000

Summary of Contents for Nitto Kohki RC1000

  • Page 1 • Due to continuous product development/improvement the specifications and configurations in this document are subject to change without prior notice. Manufactured by. 9-4, Nakaikegami 2-chome, Ohta-ku, Tokyo, 146-8555, Japan NITTO KOHKI CO., LTD. Tel : +81-3-3755-1111 Fax : +81-3-3753-8791 (Original Instructions) TV07529-1 07/2017...

  • Page 2: Table Of Contents

    Thank you very much for your purchase of this NITTO KOHKI product. Before using your tool, please read this manual carefully so that you may use it properly to get the most out of it. Please keep the manual handy - so you can use it whenever necessary.

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Before using your tool, to avoid personal injury always take the basic precautions explained in later sections. General Power Tool Safety Warnings Personal safety WARNING z Dress properly. Protective hair Do not wear loose clothing or jewelry. There is a covering Protective danger of being caught in moving parts.
  • Page 4 IMPORTANT SAFETY INSTRUCTIONS Work area safety WARNING z Do not use the tool at home. This is a professional tool (industrial or work tool for business). Do not bring the tool home and use it there. z Keep the work area clean. Working in a messy work area or work table could cause an accident.
  • Page 5 Handling tools WARNING z Storing the tool When the tool is not used, store the tool in a dry location. Also, store the tool out of the reach of children. For some tools, the storage temperature and humidity are specified. Store the tool in an appropriate location. z Be cautious about how the tool is carried.

  • Page 6: Product Specific Safety Rules

    IMPORTANT SAFETY INSTRUCTIONS Product Specific Safety Rules WARNING z Use the tools indoors. This tool is not dust and leak-proof. Exposure to dust, sand, or rain while using it outdoors could cause a failure. z Store alkaline batteries out of the reach of children. Swallowing batteries could cause suffocation or could stay in the stomach, which is very dangerous.
  • Page 7 CAUTION z Pay sufficient attention when handling the password. Cancellation or extraction of passwords shall be paid services. z Be cautious about loss or failure. There are functions provided to lock (remote keylock, security function) the electric screwdriver using a remote controller.

  • Page 8: Application

    1 Application This is a remote controller used to set the electric screwdriver remotely using infrared communication. 2 Checking Inside the Package When you open the package box, check the content of the package and also check for any damage caused by incidents during transportation.

  • Page 9: Part Names

    3 Part Names Name Function Power supply switch Turns the power ON/OFF. [TRANSMISSION] button Press to send the setting data to the electric screwdriver. [SELECT] button Selects setting items. Infrared transmission unit Sends infrared light to the electric screwdriver. LCD screen Displays the settings and remote controller status.

  • Page 10: Specifications

    4 Specifications Battery level indicator When the battery level becomes about half, a battery icon is displayed on the LCD. The battery level is about half. Data transmission becomes unstable. Replace the battery. CAUTION z Continuous standby time and the number of times data is transmitted are the standard reference upon starting to use a new battery.

  • Page 11: Preparation

    CAUTION z The range of data transmission is a standard reference. The range changes depending on the ambient environment and battery consumption. z The back of the motion setting area, the top and bottom sides, and the sides of the electric screwdriver do not respond.

  • Page 12: Basic Operation

    6 Basic Operation Start When the power switch is slid to the ON side, text is displayed on the LCD and the device starts up. When you finish using it, slide the power switch to the OFF side. Basic usage Use this device to make settings and send them to the electric screwdriver.
  • Page 13 Select the [SELECT] button to select the setting item and press the [ENTER] button To return to the previous item, press the [RETURN] button. When is displayed on the LCD, use the [UP] button / [DOWN] button to change the value Use the [ENTER] button to finalize the value The set value is saved.

  • Page 14: Switching Data Receiving Mode

    Basic Operation Switching data receiving mode Make all electronic screwdrivers to be set from the remote controller to data receiving status. While the electric screwdriver is in screw fastening mode, press and hold the [MEMORY] button and the [DOWN] button Press and hold at the same time Lights in yellow The buzzer sounds, the main LED lights in yellow and the workpiece LED...

  • Page 15: Initialization Of Settings

    Initialization of settings It is possible to initialize settings of the remote controller to the factory default. Turn OFF the power of the remote controller While pressing the [TRANSMISSION] button and [DOWN] button, turn on the power Initialization completes and a beep sounds.

  • Page 16: Settings

    7 Settings CAUTION z Always record the set values.You can utilize “Setting memo” (p. 34). If the tool fails, all settings may be initialized. Also, settings may be initialized at the time of repair in order to check operation. Please note that there is no function to output the set values to an outside device. MOTION settings Using “MOTION”...
  • Page 17 Use the [SELECT] button to select the item to set The following settings are available. SETUP Setting items Function Setting range (default value) MENU (4th layer) START_SPEED Speed level at start LV_1 to LV_9 (LV_9) OFF / 0.01 SEC to 9.9 SEC START_TIME Rotation time at start (OFF)

  • Page 18: Function Settings

    Settings FUNCTION settings Using “FUNCTION” in MAIN MENU, you can set the content of “Function setting mode”. The function setting mode of the electric screwdriver and remote controller menu correspond as shown in the following table. For the details of each function, refer to the instruction manual for the electric screwdriver. Function setting mode of the electric screwdriver Setting of MAIN MENU “FUNCTION”...
  • Page 19 Use the [SELECT] button to select the item to set The following settings are available. Setting items SETUP MENU Function Set value (default) (3rd layer) CONFIRM SF_TIME Screw fastening confirmation time OFF / 0.1 SEC to 9.9 SEC (OFF) OFF / 0.1 SEC to 9.9 SEC NG SIGNAL_TIME NG signal output time (0.1 SEC)

  • Page 20: Using Channel Patterns

    8 Using Channel Patterns It is possible to register a series of patterns that is a combination of each channel set using “MOTION” in MAIN MENU. One pattern can be switched up to 8 times. Registering channel patterns When using one channel pattern or using the link function, it is possible to use channel pattern A only. When using channel pattern A to D, an external signal is connected.

  • Page 21: Canceling The Channel Pattern

    Use the [UP]/[DOWN] buttons to select the next channel to register and then press the [ENTER] button Repeat Steps 6 to 7 to register order of channel switching. When completing switching in less than 8 times, register CH_FIN as the number following the final number.

  • Page 22: Setting The Electric Screwdriver

    Using Channel Patterns Setting the electric screwdriver Use the electric screwdriver or remote controller to change the following settings. Channel switching method Set “Channel switching method” (CH SWITCHING) of the external signal setting (EXTERNAL SIGNAL) to “Inside screwdriver” (INTERNAL). When the channel pattern is set to ON, you cannot switch the channel using the buttons on the electric screwdriver. Workpiece signal To connect an external signal to use multiple channel patterns, set “Workpiece signal”...
  • Page 23 Workpiece Reset Workpiece Workpiece Workpiece Signal +24 V signal signal signal B signal C signal D Yellow- Wiring color White Green Peach Purple Black green Pin No. Connection example Reset switch I/O direction External power supply Switching the channel pattern The current channel pattern ends →...

  • Page 24: Remote Keylock

    9 Remote Keylock It is possible to use the remote controller to lock the buttons operation of the electric screwdriver to prevent the settings being changed by a worker other than the work manager. Lock and unlock are performed using the remote controller. Lock and unlock can also be performed using other spare remote controllers as well.

  • Page 25: Torque Check Mode

    10 Torque Check Mode It is possible to check the torque by operating the electric screwdriver at the finish (last) speed level. In torque check mode, settings other than the finish speed level (FIN_SPEED) are invalid. From MAIN MENU, press the [SELECT] button to select “TORQUE CHECK”...

  • Page 26: Security Settings

    11 Security Settings You can set it so that a password is requested when the electric screwdriver is turned ON. When a password is set, the electric screwdriver cannot be operated until the correct password is sent from the remote controller. CAUTION z This function is not a function to prevent theft.

  • Page 27: Enabling The Password

    Enabling the password From MAIN MENU, press the [SELECT] button to select “SECURITY” and then press the [ENTER] button “SETUP MENU” is displayed. Press the [SELECT] button to select “SECURITY_ON” and then press the [ENTER] button While is displayed on the LCD, press and hold the [TRANSMISSION] button The password is enabled.

  • Page 28: Entering The Password

    Security Settings Entering the password This section explains how to start the electric screwdriver with the password set. Lights in yellow Turn OFF the power of the electric screwdriver and turn it ON again The parameter LED of the electric screwdriver displays “PS” and the main LED lights in yellow to enter password input waiting status.

  • Page 29: Appendix

    12 Appendix Troubleshooting Symptoms Location to investigate Solution Has the battery life expired? Replace with a new battery. (p. 9) The remote controller Is the battery type or orientation Check the battery type and orientation of the battery. does not operate correct? (p.

  • Page 30: Maintenance And Inspection

    Separate power tools, accessories, and packing materials for environmentally-friendly recycling. z Do not dispose of the power tool as household garbage. z When disposing of electric tools, give them to NITTO KOHKI or your dealer. z Within the EU region, Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC is rolled out in domestic laws and it is prescribed to separately collect power tools, which are recycled and reused.

  • Page 31: External Dimensions

    External dimensions 55 (2.17")

  • Page 32: Screen Display List

    Appendix Screen display list Screen display Details Reference Auto reverse mode setting AUTO REVERSE A mode which automatically change the rotation of the electric screwdriver to p. 15 the reverse direction Bit Breaks function BIT BRAKES A function to prevent the bit from inertial rotation when the start switch is p.
  • Page 33 Screen display Details Reference NG_WORK Workpiece setup NG sound setting p. 17 Pin No. 4 input switching NO.4 PIN SIGNAL p. 17 Select STOP SIGNAL (forced stop signal) or LINK IN Pin No. 7 output switching NO.7 PIN SIGNAL p. 17 Select CH SWITCHING (outputs the channel switching signal) or LINK OUT OK signal output timing OK SIGNAL TIMING...

  • Page 34: Glossary

    Appendix Glossary Term Description [DOWN] button Decreases the set value number [ENTER] button Finalizes the set item Initialization Returns the settings to the default status Link function Function that links multiple electric screwdrivers Link connection Remote keylock Locks electric screwdriver button operations by the remote controller [RETURN] button Returns the set item Screw fastening mode...

  • Page 35: Index

    Index Battery..............9 Battery level indicator..........8 Channel..............18 Channel pattern ............. 18 Data receiving mode ..........12 Data transmission range .......... 8 External signal connection ........20 FUNCTION ............16 Function setting mode..........16 Initialization ............13 Keylock ..............22 MOTION ..............

  • Page 36: Setting Memo

    Appendix Setting memo MAIN MENU “MOTION” (Motion settings) Motion No. Setting range SETUP MENU Setting items of electric CH_1 CH_2 CH_3 CH_4 CH_5 CH_6 CH_7 CH_8 (default) screwdriver START_SPEED LV_1 - LV_9 (LV_9) Speed level at start START_TIME OFF / 0.01 - 9.9 SEC (OFF) Rotation time at start MID_SPEED...
  • Page 37 MAIN MENU “FUNCTION” (Function settings) Motion No. of Set value SETUP MENU Setting items electric Set value (default) screwdriver CONFIRM SF_TIME OFF / 0.1 - 9.9 SEC (OFF) Screw fastening confirmation time NG SIGNAL_TIME OFF / 0.1 - 9.9 SEC (0.1 SEC) NG signal output time NG DISPLAY...

Table of Contents