SB 10 / 230V Service Manual Harman/kardon Service Manual SB 10/230 Passive Soundbar with active subwoofer CONTENTS SOUNDBAR PACKAGE LIST AND PARTS INCLUDED ITEMS SOUNDBAR EXPLODED VIEW / PARTS SUBWOOFER REAR PANEL SUBWOOFER PACKAGE LIST AND PARTS CONNECTIONS SUBWOOFER EXPLODED VIEW / PARTS...
harman/kardon SB 10 / 230V Service Manual SB 10 Included Items Included Items One SB 10 three-channel soundbar speaker One combination LFE/trigger cable One 8" (203mm) 200-watt subwoofer Important: If anything is missing, or if any part of your SB 10 system fails to operate properly, contact your dealer immediately.
harman/kardon SB 10 / 230V Service Manual SB 10 Subwoofer Rear-Panel Controls Subwoofer Rear-Panel Connections Subwoofer Level Control Bass Boost Switch Phase Switch Power On Mode Switch External Trigger Input Connector Line-Level In LFE Connector Line-Level In L/R Connectors Power Switch Power Cord PL0004-01001 Phase Switch: This switch determines whether the subwoofer driver’s piston-like action...
Page 4
harman/kardon SB 10 / 230V Service Manual SB 10 Speaker Placement Speaker Placement Placing the Soundbar on a Table Placing the Subwoofer If your TV is placed on a table, you can place the soundbar on the table directly in front of Since our ears cannot locate the source of sounds at the low frequencies that the the TV stand, centered with the TV screen.
harman/kardon SB 10 / 230V Service Manual SB 10 Connections Connections CAUTION: Before making speaker connections, be sure that your receiver or amplifier IMPORTANT: Make sure the (+) and (–) bare wires do not touch each other or the other is turned off.
Page 6
harman/kardon SB 10 / 230V Service Manual SB 10 Connections 1b. If your receiver/processor does not have a dedicated subwoofer output but If you’re connecting to a receiver or preamp/processor with left and right line outputs does have preamp-level (volume-controlled) line outputs, use the included that are connected to front left and front right amplifier inputs, connect the single ends of LFE cable to connect one of those outputs to either of the subwoofer’s Line- Y-adapters (not supplied) to the receiver or processor’s left and right line outputs.
harman/kardon SB 10 / 230V Service Manual SB 10 Operation Operation Subwoofer Adjustments: Phase Turning the Subwoofer On and Off Set the subwoofer’s Power Switch to the “On” position. This switch determines whether the subwoofer driver’s piston-like action moves in and out in phase with the satellite speakers.
This unit is designed for trouble-free operation. Most problems users encounter are due to operating errors. So if you have a problem, first check this list for a possible solution. If the problem persists, consult your authorized Harman Kardon service center.
harman/kardon SB 10 / 230V Service Manual NORMAL SW100 INPUT J100 CN100 TO MAIN PCB CON2.0-4 CON2.5-2 J101 CON2.0-4 Title Size Number Revision Date: 2010/8/3 Sheet of File: D:\HKTS200\DV1\LFE_SW.SchDoc Drawn By: Page 14 of 16...
Page 15
harman/kardon SB 10 / 230V Service Manual 100K 100P 100P 22u/16 220P -7VA 22u/16 AUTO ON AUTO NORMAL REVERSE 220P 22u/16 TL072 TL072 3.3V 22u/16 RCA-3P BASS PHASE 220P +7VA 22u/16 R28 10K R30 10K R29 10K PWR MODE BASS PHASE MCU3.3V MCU3.3V...
Page 16
harman/kardon SB 10 / 230V Service Manual +47V PVCC_S +3.3V +3.3V +3.3V PGND EAPD 3.96 COILS-4 EAPD# +3.3V 309A_PWRDN 309A_PWRDN BEAD-600 SUB ++ SUB + GNDREF OUT 1A 22UH 104/100V X7R GNDR1 OUT 1A 330PF/100V 104/100V X7R OUT 1B +3.3V 6.2R OUT 1B +3.3V...
Need help?
Do you have a question about the SB 10/230 and is the answer not in the manual?
Questions and answers