Structure & Parts - F4H NAVBOARD LME-S1 User Manual

Pedal Sensors
• SMART is equipped with four sensors under foot pedal, it will adjust to equilibrium state automatically while stepping on foot pad.
• Do not step beyond foot pad edge, please ensure your foot is sturdily placed on the pedal while driving.
• Do not load any luggage on the pedal, otherwise the sensor will assume a person is standing on it and hence remain powered
on, this increases the probability of collision and can result in injury or damage to driver or scooter itself.
Display Panel
• The display panel is located in the middle of the Navboard for ease of transmitting information.
• A Power display area:
• When green light flashing, the power is not enough. When red light flashing, the power is not available.
When power is low, the user needs to charge the Navboard.
• B Running display area:
operation status. If an error occurred in running system, the indicator lights will turn into a red light.
It shows full power when green light turns on.
when the driver stands on the pedal and trigger sensors, running indicator lights turn on in
STRUCTURE & PARTS >>
5