Installation - Chill Solutions CSXC-1 Owner's Manual

Place chiller in ventilated location, ensuring adequate space (four to six inches) for air flow.
1
Place chiller in desired location ensuring
adequate space for air movement.
4
Cut second length of tubing to connect
the other end of barb fitting to the chiller.
Secure both ends with a hose clamp.
7
Tubing should now be connected to
chiller as shown.

INSTALLATION

(Shown with optional Installation Kit)
No set in/out. Either configuration is acceptable.
DO NOT PLACE CHILLER IN CABINET OR OTHER ENCLOSURE.
2
Determine pump location and cut
a piece of tubing to appropriate length.
5
Cut another piece of tubing to connect
chiller and second U-bend. Secure with
hose clamp.
8
Installation complete.
3
6
read entire manual
before installing
chiller
3
Attach clear PVC u-bend barb fitting to
end of cut tubing. Attach other end of
tubing to pump. Secure with hose clamps.
U-bends should now be connected as
shown.