Download Print this page

PNI PG100 User Manual

Security gsm alarm system

Advertisement

Quick Links

4 wired and 6 wireless defense zones;
Can preset and store 6 voice phones and 3 message phones;
Remote two-way intercom;
Telephone (mobile phone) remote control programming;
SMS remote control preset & arm/disarm the main panel;
SMS alarm content can be changed;
10 groups of timely arm and disarm;
10 groups reply to timely control the home appliances open or close;
Can connect wireless siren(Option)
10-second automatic message recording;
Built-in intelligent English message;
Alarm locking memory and information clear for easy checking;
One-key-control function: Out Arm, Home Arm, Remote Arm;
Wireless intelligent learning encoding and comply additional accessories;
Arm, disarm, monitor and intercom by remote calling the alarm unit;
Real-time, delay, 24 hours, bypass defense zones programming function;
Built in NI-HI rechargeable battery is available to provide power supply nearly 5hours automatically after
power off;
AC and DC dual use are available for 24-hours-a-day normal guard;
Main unit anti-tamper and low-voltage detecting function.
1 System Introduction
Wireless GSM intelligent anti-theft electronic alarm system is an innovative wireless mobile intelligent
warner integrating GSM digital signal processing techniques and imported STC microprocessor, and a variety
of technologies including digital voice announcer, English SMS, learning code, etc.
In addition, this alarm system is highly automatic, giving automatic voice or SMS alert in the event of
emergency without intensive manual settings required. Features of stability, reliability, safety, and humanizing
control enable it to be widely used for alert in shops, convenience stores, offices, villa as well as residential
communities
Gate magnetism installation
Use the random equipped double-side tape to stick a magnetic stripe on the door and affix the gate magnetic
emission box on the doorframe. Pay attention to put the magnetic strip close to the side with indicator lights of
the emission box during installation, assuring proper alignment and the smaller distance the better.
Security GSM Alarm System
USER MANUAL

Advertisement

loading
Need help?

Need help?

Do you have a question about the PG100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for PNI PG100

  • Page 1 Security GSM Alarm System USER MANUAL  4 wired and 6 wireless defense zones;  Can preset and store 6 voice phones and 3 message phones;  Remote two-way intercom;  Telephone (mobile phone) remote control programming;  SMS remote control preset & arm/disarm the main panel; ...
  • Page 2 Infrared detector installation The principle of infrared detectors is to sense people’s movement through sensing infrared signals generated by bodies and the detection range is usually 5-12 meters. Infrared sensor should be installed about 2.2 meters away from ground. Aim straight at the detection ranges. Moreover, the infrared detector can be only installed in the room, without facing the sunshine, windows and other places where temperature is easy to change, because the installed location may influence the detection range and accuracy.
  • Page 3 4 Installation  Main Unit Installation Be careful to keep it away from large metal objects or household appliances which may cause high frequency interference, as well as barriers such as reinforced concrete walls and fire doors.  SIM Card Installation Step 1: Push out the SIM card socket as the open direction.
  • Page 4 Long “beep” Confirm prompt Beep Four short “beep” Error prompt “Beep” continue SIM card is not fit or power on for the first time Defence zone Always on Alarm lock indicator Flickering Disarm status, this defence zone is triggered Arm indicator Fast flickering Arm status Slow flickering...
  • Page 5 [Set] for 3 seconds,the main unit exits from setting. [Arm] indicator goes off, the main unit returns to the status of disarm.  Code Pairing by Remote Control Code Pairing of Remote Control In the status of disarm, enter settings and press [Set] once again, the main unit emits a short “beep” and all the indicators of the defence zone are always on, which indicate that the unit enters remote control code pairing status;...
  • Page 6 In the status of disarm, enter settings and skip code pairing of the remote control; press [Set] once again, then the indicator for defence zone 1 goes on; then, long press [Set], three seconds later the main unit emits a long “beep”, and the indicator of defence zone 1 goes out. Code pairing for defence zone 1 is deleted successfully.
  • Page 7  SMS Instructions Function Operation Instructions Notes [Programming password] +[1-9] + Custom SMS [content of the message] [Programming password] Function settings +[Instruction] Arming [Programming password] +[“SF”] For example:8888SF Disarm [Programming password] +[“CF”] Intelligent defenses [Programming password] +[“BF”] [Programming password] Check status +[“STATUS”] Open the output [Programming password] +[“ON”]...
  • Page 8 When it is set to alert through message, the main unit will send alarm SMS to three phone numbers, (for example: defence zone 5, balcony alarm). Telephone number 7-9. Phone Number Settings: ××…×× # ××…×× # … ××…×× # ××…×× # Delete Phone Number: # 1 # # 2 #...
  • Page 9 Delay alarm defense area: When the defense area is triggered and need alarm, the main engine can delay the alarm (the concrete delay time is determined by the “Setting up alarm delay”); moreover, the warning behavior can be canceled during delayed time. Repeat triggered defense areas: When the detector is triggered once, the system will not alarm immediately.
  • Page 10 For example: Auto arm every day 17:40,Stored in the Group 1 Operating method:*317401* SMS Command: 8888*317401 2. Timely Disarm * 4 AA BB C * “AA”indicates: the hour of the setting time “BB” indicates: the minute of the setting time “C”...
  • Page 11 Zone Alarm after the message selection * 9 A B * Notes: A: Number of defence zone: [1~6] corresponds to defence zone 1 to defence zone 6 respectively. [7~0](0 as 10)Correspond to the cable zone L1-L4. B: SMS number, value 1-9 Set 9 groups of self-editing short messages Programming Password + A + SMS content Notes: A: SMS number, value 1-9...
  • Page 12 out. Remote control operations: press [ ] on the remote control. 3. Emergency alarm Press “ ”button on remote controller, main engine will enter the state of emergency alarm instantly, calling automatically and siren going off. Press“ ”button on remote controller once is silent alarm, while long press or two presses will open the siren.
  • Page 13 Press “1” button once you can listen for 20 seconds 6. Processing method after receiving alarm In case of emergency, main machine will dial the setup telephone numbers automatically and give alarm rings based on settings. If the host’s phone is in use or not able to connect, the system will dial next alarm phone, until it is dialed and hosts confirm.