Vertical Installation - Pyle DISC CD CHANGE Instruction Manual

VERTICAL INSTALLATION

c)
e)
a)
b)
Attach the brackets (a) to each side of the unit
using hex bolts with washers (c).
Attach the floor base plate (b) to the brackets a)
using the wing nuts (d)
d)
Press the unit to the floor, and
remove the wing nuts (d), and lift
off the changer
FOR AN ANGLED INSTALLATION, TURN TO THE 45° POSITION AND ATTACH LOCK
SCREW (F1) IN THE MIDDLE HOLE.
d)
a)
b)
c)
d)
Lay down the carpet. Cut 1 "X" on
each area of the carpet where the
mounting bolts will pass through
Lift the carpet and determine the mounting
location. Fix the floor base plate (b) to the floor
using self-tape screw (f).
Mount the unit in place, using 4
wing nuts (d)
8
d)
d)