Tool Protection & Care - Stanley HV18 User Manual

RECOMMENDED HYDRAULIC OILS
Below is a list of recommended oils by brand.
• Make sure all couplers are wiped clean before
connection.
• Always store the tool in a clean, dry space, safe
from damage or pilferage.
• Make sure the circuit PRESSURE hose (with male
quick disconnect) is connected to the "IN" port. The
circuit RETURN hose (with female quick disconnect)
is connected to the opposite port. Do not reverse
circuit flow. This can cause damage to internal seals.
• Always replace hoses, couplings and other parts
with replacement parts recommended by STANLEY.
Supply hoses must have a minimum working
pressure rating of 2500 psi/172 bar.
TOOL PROTECTION & CARE
Brand Biodegradable
CITGO
AMS Oil
Exxon Mobil
Exxon Mobil
Shell
Chevron
Conoco Phillips
Clarion (CITGO)
Exxon Mobil
Chevron
Terresolve
Shell
*Recommended for extreme cold temperatures
In addition to the safety precautions found in
this manual, observe the following for equipment
protection and care.
Description
No Hydurance AW32
No HVH 32
No Univis HVI26*
No DTE 10 Excel
No S2 V 32
No Rando HDZ 32
No Unax AW-WR-32
Yes Green Bio 32
Yes EAL 224H
Yes Clarity AW32
Yes Envirologic 132
Yes Naturelle HF-E-32
• Do not exceed the rated flow (see Specifications) in
this manual for correct flow rate and model number.
Rapid failure of the internal seals may result.
• Always keep critical tool markings, such as warning
stickers and tags, legible.
• Tool repair should be performed by experienced
personnel only.
• Make certain that the recommended relief valves
are installed in the pressure side of the system.
• Do not use the tool for applications for which it was
not intended.
HV18 User Manual ◄ 11