Installation; Install The Unit; Remove The Unit - Pyle view PYLE PLDBT30U Owner's Manual

Installation

Before installing the receiver, fit it in the suitable place of your car.
Then connect the corresponding speakers and electrical connections.
When your system is operated properly, follow the instructions installation

INSTALL THE UNIT

1)Install the bracket
2)Bend over some slices to secure the
installation of bracket inside of dash.
3)To avoid shake of the receiver, make
sure to install the fixation strap behind
the receiver.

REMOVE THE UNIT

Insert the keys into the small gaps in
the right and left sides of the unit at
the same time. Link the keys to the
slices and then pull out the unit lightly
to remove it from your car, and then
pull out the connection plugs.
2)Bend over the slices
(supplied)
3) Two keys for releasing
the unit (supplied)
4
1) Adapter
(not supplied)
Slices
(supplied)