Advertisement
Assembly Instructions (cont)
Step 2
Place 4 x Lower Legs (2) into the base of the 4 x Upper Legs (1).
Connect 1 x Side Bar A (3) and 1 x Side Bar B (4), secure these
together using 1 x M6x25mm Bolt (F1). Repeat this for the other side.
Secure the Upper Legs (1) and Lower Legs (2) into place using a completed side bar, 1 x M6 x 42mm Bolt
(F3), 1 x Washer & Nut (F5), 1 x M6 x 47mm Bolt (F4) and 1 x Fixing Knob (5). Repeat this for the other
side.
The M6x42mm Bolts (F3) and Washer & Nuts (F5) will be used for Side Bar Bs (4) which should
Note:
be placed at the rear of the unit. The M6x47mm Bolts (M4) and Fixing Knobs (5) will be used for Side
Bar As (3) which should be placed at the front of the unit.
7
S002028 Action Nursery Swing
Advertisement
