Table of Contents
Advertisement
www.shsglobal.store
Appendix B
LedGuru Software
Input Tab
The LedGuru Input tab allows the user to select inputs and adjust various input
parameters.
Figure 3.10
LedGuru Input Tab
The VP1 will accept three active video inputs simultaneously: analog, SDI and DVI.
Any two of these inputs can be displayed simultaneously using the Main and
Picture-in-Picture scaling channels. Only one analog input can be selected at a
time. The signal indication for the currently selected analog input is updated when
the signal is first selected (continuous signal status polling will be added in a later
release). Note that there is only one analog input channel so only one analog input
type can be monitored at a time.
STEALTH® v2 User's Guide
B-3
Hide quick links:
Advertisement
Table of Contents
