Cisco ONS 15600 Reference Manual page 17

Chapter 2 Cards Features and Functions
Table 2-15 OC192/STM64 LR/LH 4 Port 1550 Card OGI Connector Pinout (continued)
Connector OGI Pin and Card Port
4 1
—
2.7 OC192/STM64 SR/SH 4 Port 1310 Card
The OC192/STM64 SR/SH 4 Port 1310 card provides four short-range, Telcordia-compliant, GR-253
SONET OC-192 ports per card. The ports operate at 9953.28 Mbps over a single-mode fiber. The
OC192/STM64 SR/SH 4 port 1310 card has four physical connector adapters with two fibers per
connector adapter. The card supports STS-1 payloads and concatenated payloads at STS-3c, STS-12c,
STS-24c, STS-48c, or STS-192c signal levels.
2.7.1 OC192/STM64 SR/SH 4 Port 1310 Slots and Connectors
You can install OC192/STM64 SR/SH 4 Port 1310 cards in Slots 1 through 4 and 11 through 14. The
card provides four bidirectional OGI type connector adapters on the faceplate (angled downward),
carrying two fiber strands (1 transmit and 1 receive). Only one transmit and receive pair is used per
connector adapter. On a breakout cable, use port three, fiber 4 (transmit) and fiber 3 (receive).
2 3
— Transmit 4
4 5
Receive 4 —
Cisco ONS 15600 Reference Manual, R5.0
2.7 OC192/STM64 SR/SH 4 Port 1310 Card
6 7
— —
8
—
2-17