Table of Contents
Advertisement
Care and Maintenance
General
Important: Always unplug the appliance from the power socket during cleaning and
maintenance.
Never use any sharp instruments or abrasive substances, soap, household cleaner, detergent or wax
polish for cleaning.
Use luke warm water to clean the cabinet of the appliance and wipe it dry.
Never clean the appliance with flammable fluids. It could cause a damage and fire hazard.
Ensure the unit is dry before connect to the mains.
Trouble Shooting
In the unlikely event of difficulties with your appliance please follow the trouble shooting guide below. If
the problem persists, contact the retailer if the machine is still under guarantee on 0345 640 0800.
Problem
Appliance does not
start
Paper cannot exit at
another side
7
Possible cause
The mains plug is not plugged in.
The switch is off
Fuses of the electrical system at
home open.
Jammed with paper inside
the motor has overheated and the
thermal cutout device has tripped
It jammed, can't reverse automatically
Solution
Insert the mains plug.
Let switch on
Check the protection devices and
fuses.
Clean the jammed paper
Allow the Laminator to cool down for
40 minutes,then it should
automatically start working again.
unplug the Laminator and press" jam
release switch" gently to pull the
paper out.
Advertisement
Table of Contents
