Table of Contents
Advertisement
OPERATION
MP3 OPERATION
• SWITCHING TO CD (MP3) MODE
If there is no MP3 disc inserted in the
driver:
Gently insert the MP3 disc with the
printed side uppermost into the disc
slot (5) until you feel some resistance.
The MP3 disc is drawn into the driver
automatically. The MP3 playback
begins.
If a MP3 disc is already inserted in the
driver:
Keep pressing MOD button (6) shortly
until the CD (MP3) mode display
appears.
• EJECTING A DISC
Press
button (4) to stop MP3 playing
and eject the disc from the disc slot
(5).
• SELECTING TRACKS IN SINGLE
STEP
Press TUNE/TRACK
TUNE/TRACK
to the previous track or the following
track. Track number shows on display.
• PAUSING PLAYING
Press PAU button (20) to pause MP3
player. Press it again to resume play.
• PREVIEWING ALL TRACKS
Press SCN button (21) to play first
several seconds of each track on the
current disc. Press again to stop intro
and listen to track.
• REPEATING THE SAME TRACK
Press RPT button (22) to continuously
repeat the same track. Press it again
to stop repeat.
• PLAYING ALL TRACKS IN RANDOM
Press SHF button (23) to play all tracks
on MP3 disc in random order. Press
again to cancel the function.
• SELECTING TRACKS BY AS/PS/D-
AUD BUTTON
AS/PS button is assigned as Digital
Audio Mode selection button in MP3
operation. When pressed, it is
activated as selecting each mode of
Digital Audio. "Searching track directly"
button (16) or
button (17) to move
=> "Searching Directory or File
Name"=> "Navigation" from root by
TUNE/TRACK UP/DOWN buttons =>
"Navigation" from current directory by
TUNE/TRACK UP/DOWN buttons.
• Searching Track Directly
Press AS/PS (D-AUD) button for
one
time. It enters into "Searching track
directly" in Digital Audio CD.
The unit searches the track selected
by following direct numeric buttons:
M1-M6, MOD (7), TUNE/TRACK
DOWN (8), TUNE/TRACK UP (9),
DSP(0).
If selected three digits, the unit
searches the track at once. If
selected one or two digits, the unit
wait for ENT (BND/LOU) button for
seconds. The unit searches the track
after few seconds, even if the enter
button is not pressed.
• Searching Directory or File Name
Press AS/PS (D-AUD) button for
two
times. It enters into "Searching
Directory or File Name" in Digital
Audio CD.
The unit searches files and
directories that have the same
character which is inputted by the
user pressing the corresponding
buttons listed on the Table 1 below.
Explain as follows:
- Use the corresponding buttons to
select the characters A to Z, blank,
0 to 9, _, -, +.
- Press SEL button to confirm entry
of each characters.
- Press BND/LOU (ENT) button to
start the title search.
In case the selected title is a
directory name, display will show
(' '), then
- Use the TUNE/TRACK UP/DOWN
buttons to list all songs under this
directory and select the title.
- Press BND/LOU (ENT) button to
confirm and start the play.
- Repeat the above steps if the newly
selected title is again a directory.
11
Advertisement
Table of Contents
