Getting Started - Verizon Wireless Verizon Hub Quick Start Manual

Getting Started

Set Up Base and Handset
First things fi rst.
STEP 1
Attach the Support Stand to the Base
Slip one end of the support stand
into the hole at the back of the base.
Then, slide the other end of the support
stand into the other hole.
If you want to use a wireless
connection
Place your Verizon Hub on a sturdy,
fl at surface that captures a strong
wireless connection and is near an
active power outlet.
If you want to use a wired connection
Be sure to fi nd a location that's near an
active power outlet and allows you to
plug in an Ethernet cable.
4 Verizon Hub: Quick Start Guide
STEP 2
Plug in the Power Cord
Take the small end of the power cord
and plug it into the hole on the back
marked 12V DC.
Plug the other end – the pronged end –
into a power outlet. The base screen will
power on.
If you are still unsure how to connect
your Verizon Hub, go to www.verizon
wireless.com/verizonhub for more
details.
© 2008 Verizon Wireless. All Rights Reserved.
STEP 3
Insert the Battery
Slide the battery cover off the back of
the handset.
Insert the battery until it snaps
into place.
Slide the battery cover back on until
it clicks.
© 2008 Verizon Wireless. All Rights Reserved.
STEP 4
Place Handset in Cradle
With the screen facing outward, place
the handset in the cradle until you see
the battery icon appear and show that
it's charging.
It's important to fully charge the battery
before using it the fi rst time. We suggest
charging it for 12 hours. For best results,
use the handset until the battery drains
before recharging.
Verizon Hub: Quick Start Guide 5