Pyle PLD193T Owner's Manual page 12

BASIC OPERATION
4.BAND BUTTON
In RADIO mode, press the BAND button on the front panel or on the remote
control to select your desired radio band and word which band is selected will be
displayed on LCD. Press it to change the bands as below :
FM MW
For 3 Bands (Europe)
5.EQ BUTTON
Press it to turn to equalization function and to select desired audio mode.
There are four kinds of mode as below:
6-7-8-9-10-11.PRESET STATION
A.To memorize the current frequency, press any one of the six preset buttons[1-6]
on the front panel or on the remote controller hold for more than 2 seconds.
B.To recall the preset memory, press one of the preset buttons [1-6].
C.Press 1/TOP
a.In the state of VCD/CD/MP3 disc playing, press the button on the front panel
to select the first track/chapter to play.(depend on the disc used for VCD)
b.In the state of DVD disc playing, the 1TOP button is not available.
D.Long press
VCD/CD:
REP-ONE
DVD:
CHAPTER REPEAT ON
a.Continuously repeat at the current chapter/track, when selected
REP-ONE mode.
b.Select REP-ALL mode to continuously repeat all chapter/track on the
current disc.
c.REPEAT feature does not support VCD2.0 (with PBC ON).
E.Long press
a.In the state of CD disc playing, press the 3/INT button on the front panel
to play the previous 6 seconds part of each track/chapter on disc.
b.In the state of DVD/MP3 disc playing, the 3/INT button is not available.
c.In the state of VCD disc playing , long press the 3/INT button, the screen will
display as follow (long press it again will release this mode.):
LW
JAZZ CLAS
button to select the first track/chapter to play.
2/RPT button to select repeat mode as follow.
REP-ALL
TITLE REPEAT ON
REPEAT OFF
3/INT button to scan disc.
SELECT DIGEST TYPE:
TRACK DIGEST
DISC INTERVAL
TRACK INTERVAL
FM MW
For 2 Bands (Europe)
POP ROCK
11
FM AM
For 2 Bands (USA)