CAMBRIONIX PP15S User Manual
Hide thumbs
Also See for PP15S:
- User manual (41 pages) ,
- User manual (38 pages) ,
- User manual (33 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CAMBRIONIX PP15S
Summary of Contents for CAMBRIONIX PP15S
- Page 1 PP15S User Guide Revision Number 1.2...
-
Page 2: Table Of Contents
Contents 1 - Labelled diagram of the PP15S ......................3 2 - Technical Data ............................ 4 3 - Items Required for Use ........................5 4 - Connecting the Power Supply ......................5 5 - Using the PP15S ..........................6 5.1 - Charging ............................6 5.2 - Syncing ............................ -
Page 3: Labelled Diagram Of The Pp15S
1 - Labelled diagram of the PP15S The PP15S has a host port which enables syncing of devices as well as allowing the user to control and update the PowerPad, a red ‘power on’ LED and an on/off switch. Host Port... -
Page 4: Technical Data
50 ̴ 6 0 Hz Input Connector: Output Voltage: Output Current: Output Power (Total): 180W Output Connector: 4 pin mini din PP15S Input Voltage: 12V DC Input Current: Input Frequency: N/A (DC input) Input Connector: 4 pin mini din Output Voltage: 5.2V... -
Page 5: Items Required For Use
3 - Items Required for Use A 180W Power Supply (we recommend a FSP180- ANAH1 or a Powerpax SW4043F or a EA12501B-12). A C13 power cord with your desired plug type (e.g. a G type plug for the UK). A USB-A to USB-A cable USB cables and mobile devices 4 - Connecting the Power Supply 1) Push the 4 pin mini din from the power... -
Page 6: Using The Pp15S
Connect the host port to the host computer via the USB-A to USB-A cable. Connect the mobile devices by inserting the cables into the devices and any of the 15 USB-A sockets on the PP15S board. To synchronise, open the desired synchronising application and use it as if the devices are connected to the host computer. - Page 7 8) Wait for the old firmware to be erased and the new firmware to be written. Once the green bar has filled and disappeared the PP15S has been updated and is ready to use. NOTES Once a successful update has been performed the number in the firmware column will match the firmware version listed above the white section of the window.
-
Page 8: Using The Mounting Holes
6.2 - Using the mounting holes The PowerPad comes with mounting holes on each of the 4 corners. The holes are suitable for M5 screws suitable for the material you are mounting it to. Do not use a countersunk head screw as this may damage the plastic flanges, we recommend using a “pan head”... -
Page 9: Safety Messages
When installing the PP15S, measures must be taken to avoid physical damage to the power supply cord, including proper routing of the power supply cord and provision of a mains outlet near the PP15S, or repositioning of the PP15S near a mains outlet. 8 - Certification & Standards...
Need help?
Do you have a question about the PP15S and is the answer not in the manual?
Questions and answers